1995 Evinrude 115, Broke enrichment solenoid carb brass fitting

[rjcamel2355]

Hey guys,
I have a broken brass barb fitting going into the top of my carb, that my enrichment solenloid line goes to..... I cannot for the life of me find one in a diagram, or searching around on google.

Can anyone tell me where I can find a replacement?, or if I just need to go to the hardware store and what size to buy?

 

[interalian]

I found a link to a place selling them in bulk, but I can't for the life of me find it now. Hope somebody posts it again - useful for those wanting to convert from choke plates as well as for your repair.

 

[bob johnson]

you don't say what model 115 you have...they made 2 TOTALLY different 115 HP in 1995...one a 60 degree block looper, the other a 90 degree block cross flow.

if its a 60 degree looper, the part is #0326952 cost 34.95 believe it or not and there 2 required.....


ACTUALLY iboats, sells them

http://www.iboats.com/NIPPLE/dm/cart_id.483523804--session_id.890303942--view_id.1498533

bob

 

[boobie]

Go to a BRP dlr and see if he has a 327706 fitting. That may work.

 

[rjcamel2355]

I just pushed the hose over the rest of the fitting, and it definitely isn't going anywhere...... May not be the right way, but looking at the carb.... that thing looks cast into the top of the carb and I didn't want to rip it out and not be able to replace/repair it.... so this will work... I appreciate the replies guys.

 

[bob johnson]

I just pushed the hose over the rest of the fitting, and it definitely isn't going anywhere...... May not be the right way, but looking at the carb.... that thing looks cast into the top of the carb and I didn't want to rip it out and not be able to replace/repair it.... so this will work... I appreciate the replies guys.

again, you never said WHAT MODEL your motor is...on the 115 hp I have, there is no hose attached to the carb...

bob