Evinrude 200 ficht

Blueglass49

Recruit
Joined
Jul 4, 2021
Messages
2
I have a 2002 evinrude 200 ficht and can’t get power to the starter solenoid. Replaced the ignition switch and solenoid but still nothing. Instruments and warning lights are working, starter cranks when hot wired. Checked continuity on all ignition wires, and all the fuses I could find. Don’t know what to check next — any ideas??
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,806
you are going to have to track it down with a volt meter

recheck ( ohm TEST !!) all fuses on the PDP one 10 amp feeds the switch


Some PDP (if you search google ) have bee known to have bad solder joints on the B+ input to the PDP they can be resoldered if handy with a soldering iron .

how's power trimming doe it work ?
 

Attachments

  • PDP ficht 2002.PNG
    PDP ficht 2002.PNG
    376.8 KB · Views: 4

Blueglass49

Recruit
Joined
Jul 4, 2021
Messages
2
PDP or relay
you are going to have to track it down with a volt meter

recheck ( ohm TEST !!) all fuses on the PDP one 10 amp feeds the switch


Some PDP (if you search google ) have bee known to have bad solder joints on the B+ input to the PDP they can be resoldered if handy with a soldering iron .

how's power trimming doe it work ?
Thanks, I’ll check that next. Yes, the power trim works ok.
 
Top