Carburetor Issue. Need help

[Ternpest]

The black piece that receives gas broke.

I am not sure what to purchase. Am I going to need to replace the whole float assembly for the piece or would it even be included. It’s not shown in the prints I’ve found.
Please help.

 

[racerone]

Ok-----So what part are you talking about / looking for ?----Your post is not very clear to me.

 

[Ternpest]

Ok-----So what part are you talking about / looking for ?----Your post is not very clear to me.

The black piece that lets gas in.

 

[Crosbyman]

no need to change much ....try to locate an eqv. brass nipple if threaded

if not threaded in the carb body thread the body for a matching nipple .

or.... try to find just the plastic nipple

 

[Ternpest]

no need to change much ....try to locate an eqv. brass nipple if threaded

if not threaded in the carb body thread the body for a matching nipple .

or.... try to find just the plastic nipple

First issue is the broken piece won’t turn or pull off. Is it safe to remove it by breaking the piece further

 

[Ternpest]

Now what?

 

[racerone]

Find a used carburetor at your local boat shop.-----Find one on E-BAY.-----Drill and tap for pipe thread and a new nipple.----Choices are endless.-----Your location ?

 

[Ternpest]

Find a used carburetor at your local boat shop.-----Find one on E-BAY.-----Drill and tap for pipe thread and a new nipple.----Choices are endless.-----Your location ?

Greenville Texas

 

[racerone]

Visit your local machine shop or boat repair shop.