1988 364v Comanche bass ranger

[holstein9193]

I recently acquired a bass ranger. I have been trying to restore it. However the fuse box has me a bit perplexed. How does the fuse box get power to run the fuses? There is no negative or positive lead wires on this thing. If someone could please advise I would greatly appreciate it. I have attached pictures of the box.

 

[Scott Danforth]

The large red wire is your feed. There are buss bars.

Ground wires go to a ground buss

 

[holstein9193]

The large red wire is your feed. There are buss bars.

Ground wires go to a ground buss

I don’t see that in this system. The picture is the entire fuse block. No bus just those crazy push in wire connections

 

[Scott Danforth]

The fuse block is only the B+ supply to your circuits. There is a buss strip in the fuse block in your pictures

 

[holstein9193]

Ok? Call ignorant for a brief moment ( I appreciate you responding), but are you calling the six screws around the fuse the bus? I thought those were just there to keep the fuses aligned.

 

[Scott Danforth]

No, the stamped metal teminal strip

The 6 screws are holding the 3 mini fuse holders in a piece of plastic