No black/yellow kill wire on 9.9. 4-stroke

[robinfla52]

I get no spark on 2005 Mercury 9.9 4-stroke.I was thinking disconnect kill wire but can't find it. Since picture upload is not functioning. It is remote start which works fine. I use an external start button. Stator tests good .

 

[robinfla52]

I see picture upload is fixed. Yay

 

[Chris1956]

The maxrules site may have a wiring diagram for your motor.

 

[robinfla52]

The maxrules site may have a wiring diagram for your motor.

Thanks

 

[robinfla52]

Thanks

Checked it out. I know the color code. Problem is that there are no kill wires at all

 

[Chris1956]

Do you have a stop button?

 

[boscoe99]

How are you stopping the motor?

 

[flyingscott]

look up the wiring diagram for a 9.9 tohatsu.

 

[boscoe99]

This is from a 2007 Tohatsu owner's manual for a 9.9 four stroke. There has to be wires from either the lanyard kill switch of the push to stop switch at the end of the tiller handle.

 

[robinfla52]

SD ok okay ko

How are you stopping the motor?

I can't start the motor, no spark so I was going to disconnect kill wire to eliminate that causing a problem.
But there are none.

 

[robinfla52]

This is from a 2007 Tohatsu owner's manual for a 9.9 four stroke. There has to be wires from either the lanyard kill switch of the push to stop switch at the end of the tiller handle.

Motor was converted to remote control, no tiller arm or wires. I understand how kill wiring works, but there is no black yellow kill wire anywhere. I'm trying to figure out why no spark.coil and stator ohm tests good.

 

[robinfla52]

look up the wiring diagram for a 9.9 tohatsu.

Motor was converted to remote control, no tiller arm or wires. I understand how kill wiring works, but there is no black yellow kill wire anywhere. I'm trying to figure out why no spark.coil and stator ohm tests

 

[flyingscott]

Are you positive tohatsu uses a black yellow wire for a kill circuit?