Ok have it running good except at WOT only get 4600, last year was getting 5800. Only difference is the lower unit is from a 1972 1150, which may have a different gear ratio (maybe)??? Pretty sure lower unit I was running last year had a 2.1 and I think this one may have 1.78. Would that be the...
Re: My 1977 Intruder Aquarius rotten deck
Would you be able to post some pics of the inside of the hull? Also did you see these pics of the logo?
Thanks.
Re: 1977 Invader Aquarius logo
Ok not the best, but here is view of aft seats. I will get better pics next week. Also will post logo pics later today.
Is this close to what yours looks like?
I picked up a 1971 Merc 650 for cheap ($125) the lower unit had "something" happen in it, that's what P/O said (didn't hit anything he thought). The case in cracked near the back. I would like to pull the parts out, what should I look for as far what could be damaged/broken? I was able to pull...
Will a lower unit from a 1968 100hp inline 6 work with a 1971 65 HP 4cyl? I know the gear ratio may be different.
If not then where do I find what lower unit will work, besides one from a 1971 65 HP?
Thanks,
If I swap a Mercury 1973 1500 powerhead with one from a 1977 which years specs should I use? According to the manual I have the only difference is in the timing 1973 has 6 btdc for the throttle pickup - primary, 1977 has 1-3 btdc.
Or does this statement cover this?
" All of them are speced...
When I go to set the impeller I noticed that it makes contact with the face plate to pump cover gasket and not the metal of the face plate. I am using this kit "SIERRA 18-3507 Water Pump Kit"
Contact is made toward the front of the plate, maybe the wrong gasket in the kit? It lines up with the...
Confused.
Ok cant seem to find the answer so I will ask this.
Does the UP (top) button on the 3 button panel supposed to do anything?
If I press both the middle and up button the motor runs.
If I press the IN button (bottom one) the motor runs in the opposite direction.
If I only press...
Has anyone around here that might have replaced or done any work on the water pump? I have a few questions about the reassembly. I have the manual but not 100% clear about this.
Thanks.
