Current visitors

nola mike's latest activity

nola mike replied to the thread MC-1 Drive Dog failure?.

That cable needs to have nearly zero resistance to work right before strange things happen. It has to really bind to trip the cutout on...

37 minutes ago
nola mike replied to the thread Shift cable bellows..

the prop locks but you need to keep tension on the cable. it will slip out of gear if not.

Today at 4:02 PM
nola mike reacted to Scott06's post in the thread Boat had been stored for 19 years with Like.

100% when I bought my current boat in 2015 it was an 11 year old/ 37 hr boat where PO cracked the block. other than the engine, trailer...

Today at 12:47 PM
nola mike replied to the thread Shift cable bellows..

Yes, but it should still lock in one direction at least. I'd take the whole drive off, and if it isn't shifting correctly then, split...

Today at 11:46 AM
nola mike replied to the thread Boat had been stored for 19 years.

It's strange having to think that the running gear is the easy part, but it absolutely is. No way to flip this boat unless you part it...

Today at 11:44 AM
nola mike replied to the thread Mercruiser 3.0 won't "lock in".

probably won't need a gimbal puller (and I don't know that I'd replace it if it's good, though wouldn't fault you for it). with the...

Today at 6:13 AM
nola mike reacted to Scott Danforth's post in the thread MPI Starting with Like.

check fuel pressure. you could have a leaking injector that is filling the intake manifold with fuel. the excessive fuel would be...

Yesterday at 8:26 PM
nola mike replied to the thread MPI Starting.

where is the choke on an mpi?

Yesterday at 8:24 PM
nola mike replied to the thread Shift cable bellows..

Not knowing what you did, it's certainly possible to screw up the shifting when you split the drive or not engage the shift rod when...

Yesterday at 12:59 PM
nola mike replied to the thread 2005 4.3 liter Mercruiser ignition trouble.

only when warm. but the fuse didn't blow until ignition on and op switch jumped, before cranking. I was thinking high resistance...

Yesterday at 6:43 AM
nola mike replied to the thread How would a compromised bellows sink the boat?.

at least on the mercs there's a relief hole or something on the transom shield. first hand knowledge that it can absolutely fill the...

Monday at 1:07 PM
nola mike replied to the thread Ignition sparks as soon as starter stops cranking.

on a 4.3?

Sunday at 9:43 PM
nola mike replied to the thread 2005 4.3 liter Mercruiser ignition trouble.

IF you spliced into the tach, and if you're getting 9v there while cranking (you should), and if you're getting 4v at the boat side of...

Saturday at 9:16 PM
nola mike reacted to alldodge's post in the thread 2005 4.3 liter Mercruiser ignition trouble with Like.

Opinion, everybody has one We are not being told everything, the OP is trying to tell us what the readings are, "but" he either doesn't...

Saturday at 8:59 PM
nola mike replied to the thread 2005 4.3 liter Mercruiser ignition trouble.

this really doesn't sound right, but if you're sure that you're getting 9v at I and 4v at the cannon plug when there's a jumper to the...

Saturday at 4:31 PM

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

nola mike's latest activity

Follow Us