Help with Evinrude ground cable

Ymtejera5 said:

Good afternoon.
I just replaced the water tube and im putting the motor back together. However there is a ground cable that connects to the plate above the rubber mount, when taking it apart that cable was ripped and never saw where the other ends connects. I need some help identifying where it the other end goes.

Cable is part labeled 14 on the following link

BRP Parts Catalogs

epc.brp.com

Click to expand...

Ymtejera5 said:

Good afternoon.
I just replaced the water tube and im putting the motor back together. However there is a ground cable that connects to the plate above the rubber mount, when taking it apart that cable was ripped and never saw where the other ends connects. I need some help identifying where it the other end goes.

Cable is part labeled 14 on the following link

BRP Parts Catalogs

epc.brp.com

Click to expand...

Crosbyman said:

engine mdl # ???

Click to expand...

Ymtejera5 said:

Good afternoon.
I just replaced the water tube and im putting the motor back together. However there is a ground cable that connects to the plate above the rubber mount, when taking it apart that cable was ripped and never saw where the other ends connects. I need some help identifying where it the other end goes.

Cable is part labeled 14 on the following link

BRP Parts Catalogs

epc.brp.com

Click to expand...

Ymtejera5 said:

Update. After scouring the internet and looking at various service manuals I figured it out. This is just a grounding cable to prevent corrosion. Goes from that plate to the lower engine cover. Thanks for your help.

Click to expand...