Search results

  1. bktheking

    76 Evinrude 15 Not getting Top end RPM

    New- Coils, wires, plugs (the correct ones for points motors), condensors , points, upper and lower crank seal, intake gasket, head gasket, carb gasket, thermostat. Motor is 100psi on both cyinders, starts third pull, pumps water like a garden hose. Boat is a 14ft Crestliner, weighs 150 lbs-...
  2. bktheking

    Mettyfish's 15hp powerhead

    I got it today, to refresh everyone's memory this was the 15 with low compression on one cylinder, he pulled the head and found scoring. The top piston is scored badly, the bottom one seems fine. The reed for the top piston has a slight gap so it will need to be replaced. It's an early...
  3. bktheking

    Back to the 76 15

    When I had the magneto off I noticed it was pretty oily under there, so I'm going to replace the upper crank seal. Magneto cam as expected is pretty much glued to the crankshaft, anyone know the quick and dirty way to get it off without wrecking it? Merci
  4. bktheking

    76 Evinrude 15 reassembled with an issue

    The gent who owned my 15 complained of a fouled bottom plug. When I got the motor home I checked compression, 95 top and bottom. The motor starter first pull. When I took it apart for paint I noticed that the bottom crank seal had let go, the spring had folded. So I put in a new seal and put it...
  5. bktheking

    What's with youtube

    Ok so this morning I go to log into my youtube account, the same account I've had for 4 friggin years and now all it does is bring me to another page asking me to login again....I never associated it to a gmail account.
  6. bktheking

    Anybody own a Crestliner

    I have the opportunity to buy what I think is a 14ft crestliner. Seats are shot but it's an easy fix. Opinions?
  7. bktheking

    Recoil question

    Just acquired a 55 Johnson cd-12 5.5, it's missing the recoil , what years/model are interchangeable? Thanks
  8. bktheking

    Bottom Crank Seal 76 15hp

    Pulled the "crankcase head" and found this: Does this stop water from getting into the crankcase?
  9. bktheking

    How long do your batts last?

    I have the opportunity to pick up an Interstate 27M marine/RV deep cycle battery, has been sitting without charge for 2 years, the owner wants $20 for it. Would you think the battery is still good if it were stored properly?
  10. bktheking

    The Johnnyruders will think I'm a traitor

    But I don't care, makes the 9.9 look small.... Got it today
  11. bktheking

    Mercury KH7

    I'm going to aquire this motor in January. Doing some research (which there isn't a lot of info on them) I stumbled upon a youtube video of a gent who explained that the water pumps were undersized in these motors and that they overheated. He went on to state that Mercury had a factory recall...
  12. bktheking

    Old 7.5 and 5.5 Owner Opinions needed

    Going back to my 7.5 and a few others who posted on here having issues with the shock abosorber, I fixed the problem and ended up welding the shock, it's a perm fix but i'd like to offer up an alternative. I'd like feedback from you for an idea i have. I have given the 2 piece shaft to a friend...
  13. bktheking

    I'm outta here

    It seems that my approach to troubleshooting by asking questions of some of the poster(s) who's name(s) I will not share is annoying to such posters. Seeing as how I live in the great white north and the boats don't like ice what would be the point of sticking around the forums to offer FREE...
  14. bktheking

    55 evinrude 7.5

    Back to this pile o crap again, my old man managed to weld the shock straight with a mig, lots of patience and easy on the heat. Put it in an electric drill and it turns true. Now onto the lower unit, what do you guys use to seal up the 2 halves of the lower unit, I tried non hardening gasket...
  15. bktheking

    Flywheel torque spec needed

    For my 55 Evinrude 7.5 hp, much appreciated!
  16. bktheking

    Ain't she a beauty

    EDIT
  17. bktheking

    F R- Can you answer this one?

    I wouldn't normally single someone out but F R , you seem to be a pretty good at this stuff so i'll try you. In another post I had asked about my 7.5, 1955 model. The shift detents are missing so I found a set, I plan on installing them. I shift the motor in forward or reverse with the motor...
  18. bktheking

    This motor is driving me nuts!!!

    1955 evinrude 7.5 OK so I fired the motor up again tonight. It has a really neat rattling sound when it starts, I ran it for about 3 minutes then the sound magically disappeared! I thought they were just loud motors until it sounded nice and quiet. I shut it off and started up again, rattle...
  19. bktheking

    1955 evinrude 7.5

    So I got this motor running tonight, seems whoever put the carb back together after they put a kit in it forgot to put the clip on for the needle, duh, the thing fired up first pull. Not a bad motor for $70. Now the question I have, on all my other motors, 9.9 and 9.5 there is a detent for the...
  20. bktheking

    Evinrude 9.9/15 Carb - Orifice won't budge

    I got my 15hp carb apart and the main orifice won't budge, upon trying to remove it after letting it soak with penetrating oil the brass on the plug broke. This carb was water submerged. I put vise grips on it only to shred the brass. Should I drill it out, anyone got any other ideas to remove...
Top