Search results

  1. npd4432

    Johnson 90 hp Service Manual Question

    I have a 2000 Johnson 90 Hp and already own the OMC service manual for the motor itself. I have a tilt and trim problem that I need to repair and the motor manual does not cover the T&T. I need to purchase an Accessories service manual which covers the T&T. My question is I cannot find a 2000...
  2. npd4432

    Anybody going to the NY boat show this week?

    I will be going tomorrow, weather looks good. Just emptied the trunk for all the new stuff I will buy. My wife will know somethings up if I start to put the hitch on the truck.
  3. npd4432

    Best pair of combos

    I am going to the NY boat show in a couple of weeks and have been throwing around the idea of buying a new pair of skis. I am 235 Lbs and currently have a pair of Connelly Quantum combos. Any suggestions for a new pair that will suit my needs. I rarely ski slalom, always deep water start and...
  4. npd4432

    Wintertime Blues

    I know the winter is just starting here in NEPA but I am missing my boat bad, so I just towed it from my lake house to my garage and have been cleaning it since. The wife is mad I took her bay in the garage but she will get over it, Well I guess she will be ready for spring time, I hope we have...
  5. npd4432

    OEM parts/fluids alternitives

    In reading my service manual I see in some repair procedures that omc brand fluids, adhesives, and other lubes are recommended, as with all manufactures. My question is are there any alternitives to OMC "Adhesive M" and OMC gasket sealing compound? I really dont feel like driving to the dealer...
  6. npd4432

    Thermostat question on v4 looper

    I have a 2000 Johnson 90 HP V4. I am in the process of getting together some parts for some winter maintainence. I already have a BRP water pump kit and want to install new thermostats. The parts cat. lists the following parts for the thermostat, 435491(t-stat) 338682(cover) 337067(spring)...
  7. npd4432

    Carb removal on 81' 7.5 HP

    I need to remove the carb to clean/rebuild it on my 7.5 HP evinrude. It looks pretty tough to get to the port side bolt. Anybody have any tips/tricks to remove?
  8. npd4432

    Getting "hot" alarm on 2000 Johnson

    Throughout the year I have gotten the hot alarm on my boat about three times. The boat has a temp gauge and is between 160 and 220 when running. It seems when I get the alarm the trim is in the lower to middle range but when I trim the motor up and the bow of the boat goes up the temp on the...
  9. npd4432

    Trim and tilt problem

    I just bought a boat with a 2000 Johnson 90 HP, the tilt and trim work fine but if left in the up position the motor will slowly fall. What do I have to do to fix this problem?
  10. npd4432

    four blade to 3 blade

    Just purchased a boat has a pirhana 4 blade 14.5 dia 14 pitch prop. The boat has a 2000 Johnson 90 HP. It turns 4800 rpm @ around 28-32 mph. I want to go to a 3 blade. What pitch would get me to around 5300-5500 RPM?
  11. npd4432

    Gearcase question

    I just purchased a 2000 Johnson 90 HP 60 degree looper model # J90VLSSS serial #G 04874910. It currently has a Pirhana propeller on it and I want to get an SS prop for it, so here is my question I need to purchase a thrust washer, prop washer, prop nut and cotter pins. Here on I boats the prop...
  12. npd4432

    boat purchase, need prop suggestions

    I just purchased a 2000 four winns 170 Horizon with a 2000 90 HP Johnson V4 Looper. The boat currently has a 4 blade pirhanna propeller on it. I have yet to put it into the water but want to get a new prop for it before I do. First question, do I need to purchase a new thrust washer and prop...
  13. npd4432

    Possible purchase

    I am looking at a four winns 170 Horizon 2000 model year. Anybody have any experiances with this boat or similar? Good points or bad? I am trying to do some research before purchase. Thanks, Mike.
  14. npd4432

    Motor Advice

    I am in the process of upgrading my boat and have not been too acustom to the new style motors. I currently have an evinrude 75 HP 1983 model year. The boat I am going to possibly upgrade to has a 2000 Johnson 60* V4 90HP. I know it has VRO and some other things my old motor does not. What...
  15. npd4432

    Where are they made??

    I am kicking around the idea of doing a repower on my boat. I would like to keep the business in the USA if I could, so my question is where are the new E-TEC motors made?
  16. npd4432

    Rude 75 HP will not run under load

    Took the boat out yesterday for the first time of the year. Ran great all day, today after about 3 hrs of running great, it will not run under load. It will rev fine and go into gear no problem but will max out under load at 3000 rpm. It happened out of nowhere all was fine and kaboom no...
  17. npd4432

    Replace coil packs? Power pack?

    My motor is 25 Years old this year and I was contemplating replacing the three coil packs, plug wires and the power pack due to age. They are not malfunctioning but they are original 25 year old units. Will this be a waste of $$$ or possibly somthing I should do for maintainance?? Any other...
  18. npd4432

    Ventalation problem

    I am currently running a 75 HP evinrude on a 16' open bow boat. The boat is mostly used for water skiing, I also have a ski pole on the boat and Nauticus smart tabs. The prop I am running on the boat is a Solas Amita 13.75" diamater and a 13 pitch. The lake I currently live on is a smaller...
  19. npd4432

    Engine weight for 75 HP

    Anybody know the weight of a 1983 Evinrude 75 HP 3 cyl., E75TRLCTE.
  20. npd4432

    Chrysler 7hp idle and starting issues

    OK, I finally got my 7hp tiller going after some time. I have resolved an overheat issue and now am on to new issues. Here is the problem I started and ran the motor in a tank for about 5 minutes. All was well, idle fine revved nice ran at correct temp it actually purred, I was about to take...
Top