Search results

  1. C

    96 johnson j150exedb. Help with hoes location

    I finished building motor i started a couple of yeas ago. I know the the fuel in, oil in , and pules limitter all connect to the bottom of the VRO and the 2 primer lines I dont know what hoses connets to the upper and lower barbs on the front a of the crank case cover. And I dont know...
  2. C

    Lower unit leaking oil from weep hole.

    96 johnson 150exedb All new seals in lower unit. None are leaking. I tilted the motor all the way up last night. The leak is from a weep hole top front lower unit. I remove the lower unit. And the cove for the shifting. Under the cover in the middle there is a threaded hole 5/16 bolt hole. When i
  3. C

    Midsection 1996

    I have a johnson j150exedb. The shaft going down through the midsection is bent. I can't get it out. I'm looking a a motor for parts. What years are interchangeable with my motor?
  4. C

    96 johnson j150exedb lower unit

    I purched a old lower unit. Removed all parts cleaned and reassemble per manual. While test running is on a hose. After 30 minutes or so, water slowed down and motor was getting hot. Removed it this evening, the water pump housing had a gummy sticky stuff blocking the passages the impeller was...
  5. C

    Johnson wiring.

    My boat has the complete main wiring harness to the remote control panel. I need to find the plug for the instrument panel. I dont know what it call or if I can buy one. I'm trying to avoid cutting the plugs off.
  6. C

    96 john 150.

    I'm putting the started together. I have the bushing for part #20. What part above the bushing? The timing cover has a bushing as well.
  7. C

    1996 150 vacum lines

    I'm putting fuel/vacumlins on my boat. I can't figure out were the line goes. It the tiny fitting between the bottom carb and the
View older results
Top