Search results

  1. trendsetter240

    Outboard Removal Tractor Style - with pics!

    So it was time for me to get around to removing my 70hp 4-stroke project motor to make way for my 2-stroke rebuild. I had put this 4S on the back of my boat to do some diagnoses. It needs a new leg, new high-pressure fuel pump and a new powerhead gasket set. I decided to leave this one for...
  2. trendsetter240

    Power trim and tilt swap 2000 70hp to 1995 70hp

    I'm in the process of rebuilding my 1995 ELEO 70HP evinrude. I also have a 2000 PL4SS 4-stroke 70hp Evinrude that is basically a parts motor. My 95 70 doesn't have power trim and tilt. Can I take the trim/tilt assembly off the 2000 model and bolt it onto the 1995 model? I tried comparing...
  3. trendsetter240

    Best new outboards on the market today

    Ok, I've been inspired by a few threads debating the pros and cons of the older (pre 1980) outboards i.e. Merc vs. Johnson. I want to hear what people have to say about the new models (2007 and newer). Personally I am in love with the new ETECs. The admiral catches me on the evinrude site...
  4. trendsetter240

    How to get a boat rated for HP

    I have a 1971'ish Grew same model as Slickcraft SS170V. The boat had no plate with a rating on it when I bought it. It has been partially restored by the PO, the transom is new and the floor was replaced. I know about the coast guard formulas, (L x W X 2)-90 and I know the original rating was...
  5. trendsetter240

    Honda 4-stroke motors - Good or Bad?

    I'm in the market for a trolling/kicker motor for my 17ft boat. I've come across a 1997 honda outboard 9.9 hp 4stroke that is in good condition and is in my price range. I've never owned a honda outboard and I was hoping to get some feedback. Are these good motors? Anything wrong with...
  6. trendsetter240

    Powerhead Rebuild Kits - Sierra vs. OEM

    I'm pricing out a full powerhead rebuild for my 1995 Evinrude 70HP ELEO. I've seen a lot of powerhead rebuild kits on ebay and other sites that contain sierra parts. I've also seen some that contain OEM parts. The sierra rebuild kits are about half the price or OEM. Is there a big difference...
  7. trendsetter240

    2000 Evinrude 70HP 4S - Won't start unless carb cleaner sprayed into air intake

    I am fixing up this 2000 Evinrude PL4SS 70HP (Suzuki DF70) and have this issue. The engine will not start unless I spray carb cleaner into the air intake. When I do this it fires right up and will run at idle fine. I let it run for 15 minutes, tried revving it up a few times and that's all...
  8. trendsetter240

    What tool to remove rod cap screws - 95 evinrude 70hp

    What type of socket do I need to remove the rod cap screws on my 1995 Evinrude 70hp? I have have regular sockets and torx sockets but none of them fit. The closest is a 3/8 thin walled socket but that doesn't make a complete fit. The manual says to use "OMC Torquing Socket P/N 331638". Is...
  9. trendsetter240

    How to find oil leak - 2000 Evinrude 70HP 4-stroke

    I have a 2000 70HP Evinrude E70PL4SS 4-stroke that the PO told me has an oil leak. He said that when it was running oil would leak out the bottom cowling and run down the leg of the outboard. At the moment I will not be able to start the engine to watch for where the oil is leaking. Does...
  10. trendsetter240

    1995 Evinrude 70 Rebuild Project

    Hi guys, I'm just starting on a rebuild (rebore, pistons, rings, bearings and powerhead gasket set) for my 95 E70ELEO. I've got a few manuals but not one for this particular model. I will be ordering one soon; any suggestions on a good manual? I wasn't that impressed with the Seloc ones I...
  11. trendsetter240

    95 Evinrude 70 Pitting in head and grooves in #1 cylinder

    I picked up a 1997 Evinrude 70 HP. The PO said that the top cylinder had some grooves in it and he didn't want to rebuild. I popped off the head and had a look. I found that there was indeed some minor grooves in the top cylinder. There was tons of carbon buildup but the piston looked ok...
  12. trendsetter240

    Can I use a 1995 2 stroke leg on a 2001 4 stroke powerhead?

    I just picked up a 1995 Evinrude 70hp E70ELEOR that is in great shape but needs to be rebored and new rings. I also have the chance to pickup a 2001 evinrude E70PL4SIA 4 Stroke that has a good powerhead but needs a leg. (for a great price) Can I use the 1995 2 stroke leg on the 2001 4 stroke...
  13. trendsetter240

    1988 Yamaha 115ETLG - Are these good motors?

    I'm looking to buy a used 1988 yam115ETLG for my boat. I've never owned a similar model yamaha nor do I know anyone that has. My question is are these motors reliable? What are the common failures and repairs required for these engines? The motor looks in good shape, has new power trim and...
  14. trendsetter240

    Do you need to use a transom saver?

    Do you still need to use a transom saver if your outboard can be trailered without tilting up the leg? My boat sits high enough on my trailer that I don't need to trim up the engine to trailer. The motor has power trim and tilt and weighs 340 lbs.
  15. trendsetter240

    1988 Yamaha 115ETLG - Are these good motors?

    I'm looking to buy a used 1988 yam115ETLG for my boat. I've never owned a similar model yamaha nor do I know anyone that has. My question is are these motors reliable? What are the common failures and repairs required for these engines? The motor looks in good shape, has new power trim and...
  16. trendsetter240

    1 3/4 inch hole in transom repair

    I have a 1 3/4 inch hole in my transom that I'm trying to repair. The previous owner had a drain plug epoxyed into the hole and I'm looking for a more permanent solution. I was thinking to use a hole saw and cut out a 1 3/4 inch plug of marine grade plywood, coat it with 3m 4200 and tap it...
  17. trendsetter240

    Repowering Advice - 17ft grew 1975-1981

    I'm seeking some advice on engine HP, Weight and prop selection to repower my 17ft grew boat. I'm not certain of the exact year and model, only that it is fiberglass over plywood and is quite heavy (maybe 2000lbs?). The boat has a 20" transom and is a deep V hull. There is no plate on the...
  18. trendsetter240

    1985 Merc Mariner 50HP 4Cyl won't idle after ethanol gas

    Thought I would post this problem and solution that I had with my Mariner 50hp. The engine ran great until I used two tanks of E10 Ethanol blended gasoline. After that the motor would start but stall right away. I could keep it running by giving it a bit of throttle so it would stay at a fast...
  19. trendsetter240

    1981 Merc 70hp Bogs down and dies over 1800 RPM

    I have a 1981 mercury 70 HP, Long shaft, remote, electric start made in canada model. This engine starts and runs great at idle but out on the water in gear it will bog down and die as you try to accelerate past about 1800 RPM. First things first, I've replaced gas tank, gas line and primer...
  20. trendsetter240

    What year / model is this Grew boat?

    HI, I picked up this partialy restored Grew boat a few weeks ago and the previous owner didn't know the year and model. It's 17ft and probably from around 1980 but I'm not sure. The boat itself rides great! I had it out in the straight of georgia of the weekend and this boat takes the waves...
Top