Search results

  1. R

    1982 Johnson outboard 60 hp 2 cly

    okay i replaced everything and started engine the was compression better than before by about 8 lbs each cylinder . But oh there no water coming out. So I took the cylinder cover off last night. Now i got to put it back together. Just realized got wait till the thermostat opens. I gong take a...
  2. R

    1982 Johnson outboard 60 hp 2 cly

    i got the cylinder head gasket in last night and i going put in on first then the part on top the to top cover where water circulate most. Should know by end of day about the compression in each cylinder look pretty good and not mut corrosion around the inside.
  3. R

    1982 Johnson outboard 60 hp 2 cly

    is it ok to attach the CYLINDER water cover to the head CYLINDER HEAD Before i attach the cylinder head to the engine?
  4. R

    1982 Johnson outboard 60 hp 2 cly

    Hi here is a picture of the water coming out of this engine before i took it apart the water pump is good. No need for me to do anything there. One of the exhaust gasket (Middle one) i used was the one in there it was pinched but i put some gasket sealer on it called the right stuff it dries...
  5. R

    1982 Johnson outboard 60 hp 2 cly

    i got a video of how my water pump is working. But right now got the head down. It is a little pitted but not the compression end. Not sure what to do about the pitted part. Yea i could of covered it up by taking out the dark part by using my hand and sand paper, but just fooling myself.
  6. R

    1982 Johnson outboard 60 hp 2 cly

    Ok thanks for the help
  7. R

    1982 Johnson outboard 60 hp 2 cly

    I took off the head because i thought the thermostat was bad. Next you ask why did think the thermostat was bad. I thought the thermostat was bad because i replaced the water pump man was it hard to line everything up right the exhaust part. After replacing the water pump. Noticed during idle it...
  8. R

    Outboard ran without water for about five minutes

    if there was some water on the impelled it might be ok that might of lubed it enough and that is a big question. If it was me and water is coming out like it use to with the same pressure. There is still a impeller and water cooling is working. If not that old, You may find out after a day of...
  9. R

    1982 Johnson outboard 60 hp 2 cly

    What caused this problem with my head gasket
  10. R

    Exhaust port mud dobber coming out of it-2005 Johnson 30 hp Outboard Motor 4 stroke

    Hi i got a 2005 Johnson J30TEL4SOC 30 hp Outboard Motor 4 stroke. Noticed a mud dobber going into it. So there must me nest in there . I cleaned it out little about a year ago. Well i did notice lately a loss of power not sure what could be. Then like a week i noticed a mud dobber flying into...
  11. R

    2005 J25TEL4SO 25 hp

    Anyone know what that cup is around the shift rod, i took the snap ring off but could not remove it and the bolts the hold the shift rod i cannot get to. Anyone know the part number how that cup is removed. The engine is stuck in first gear. Please see video
  12. R

    2005 J25TEL4SO 25 hp

    Anyone know what that cup is around the shift rod, i took the snap ring off but could not remove it and the bolts the hold the shift rod i cannot get to. Anyone know the part number how that cup is removed. The engine is stuck in first gear.
  13. R

    1979 Evinrude 70973R 70 hp Outboard

    yea it sheared the key and i made a new key and but sealant on exhaust gasket put back together once the neighbors wake some i start it
  14. R

    1979 Evinrude 70973R 70 hp Outboard

    okay is the key looks like a circular segment or like a Psychographic Segmentation i think try to make for just this weekend anyone have ideas of size?
  15. R

    1979 Evinrude 70973R 70 hp Outboard

    i got engine back together and ran it and was not pumping water took lower off and it looks like it sheared the impeller key did not see a key in there so got try get a key and how about that gasket in the picture what will that cause can i use it like that or Will this give water a chance to...
  16. R

    1979 Evinrude 70973R 70 hp Outboard

    drilled out and cut with grinder tried a puller and acetylene torch it was welded in with corrosion and one bolt broke again Basically had to cut and drill around the bolts get it off and got my heli coil in there now . but have not went past that part yet, the water was just going from on...
  17. R

    1979 Evinrude 70973R 70 hp change head with a 55 hp

    I have a 1979 Evinrude 70973R 70 hp and Cylinder Head is bad and i am going replace with it a Evinrude 55 hp Outboard Cylinder Head is there any type of problems with me doing this.
  18. R

    1979 Evinrude 70973R 70 hp Outboard

    and it off not but not that way. not do know if Evinrude Johnson OMC Outboard 55 60 HP Cylinder Head 313412 313415 will fit my engine i see picture and this one look just about like my head off my engine accept for side where you would screw the ignition coil into
  19. R

    1979 Evinrude 70973R 70 hp Outboard

    Anyone will Evinrude Johnson OMC Outboard 55 60 HP Cylinder Head 313412 313415 fit my engine i see picture and this one look just about like my head off my engine
  20. R

    1979 Evinrude 70973R 70 hp Outboard

Top