Search results

  1. G

    Mold and mildew?

    I have a mold/mildew problem in my boat. If I let the boat sit a month or so it gets covered in it. I can clean and pressure wash and scrub with chlorox and in a few short weeks it is everywhere again. I'm talking the seats, the bilge, the gel coat inside and out, everywhere. I suspect when I...
  2. G

    So why do they put those 2 nuts under the thermostat cover?

    Are those there just to agrivate us?
  3. G

    Over torqued some bolts. What would you do?

    I over torqued my exhaust cover bolts, I didn't just over torque them I OVER TORQUED them. I wasn't wearing my glasses when I read the torque values in the manual and instead of 60-84 inch pounds I read 160. As I tightened them I kept thinking this can't be right but didn't go back and check...
  4. G

    How easily should a crankshaft on a 115 rotate when turned by hand?

    Before I torqued down the bolts that join the two halves of the crankcase I could turn the crankshaft with one hand. Once I torqued down the 6 main bolts and the 8 flange bolts I have to use all my might to turn it with 2 hands. This is griping the top of the crankshaft with no flywheel on it of...
  5. G

    A little trick I've learned

    I'm currently working on my 4th engine rebuild so I am in no way an expert, but I have learned a little trick that at least for me makes inserting pistons in their bore a whole lot easier than useing one of those ring compressing tools. I always found those tools akward to work with and I have...
  6. G

    Trying to understand the water flow through a crossflow V4

    When I opened up the powerhead of my 115 Johnson I discovered definite evidence of some overheating on the left side. Before putting it back together I want to be sure everything is right with the water passages. I have spent the better part of the morning studying the powerhead and trying to...
  7. G

    Is it possible

    Is it possible to get water in the lower cylenders by a leak where the powerhead sits on the midsection of a crossflow v4? The reason I am asking is I have been trying to locate where water has been geting in. It is not a lot of water but just enough to rust the cylender when she sits. The...
  8. G

    Powerhead decision ... Rebuild or Remanufactured

    I was going to rebuild my powerhead again (just rebuilt 2 years ago) until I opened it up and found issues I am not confident about. I'm seriously considering swaping it out for a remanufactured one. I have a few questions I would like to ask. I am still trying to make my decision but I'm about...
  9. G

    Fuel pump, primer and compression issues 98 115 Johnson crossflow

    I have been struggling with 2 problems that I have pretty much figured out. 1. Cold starts--- I believe I have found the problem here, I had been thinking the primer was OK because when the engine was running and I pushed in the key it would kill the motor. However I reciently discovered if I...
  10. G

    Crazy question about a crossflow V4

    When I turn the flywheel with the spark plugs out how much noise should I hear? Mine makes pretty loud scrapeing or rubbing sound, I am just wondering if that is normal? It is not coming from the water pump it comes from the power head.
  11. G

    Ignition problem?

    My 1998 115 crossflow V4 has a problem that has been going on for over a year now, it's not a huge problem just an inconvienence that I would like to get straightened out. Every now and then maybe once every half hour or so of running time I will be cruising along on plane and all of a sudden...
  12. G

    95 30hp waterpump question?

    Excuse me for my lack of information on this question but it is not my motor and I am not the person working on it I am just trying to lend a helping hand. I frequent the Evinrude forums quite a bit because that is what I have but this is my first time asking about a Mercury. Anyway my son just...
  13. G

    Rubbing compound question

    I just finished wet sanding the finish of my boat and went down to NAPA to get some 3M Super Duty Rubbing Compound. The guy at NAPA gave me a bottle of 3M Perfect It 3000 extra cut compound instead and said it was the same product. Well, I know he is wrong but was wondering if it is close...
  14. G

    Water in the crankcase questions? 115 Johnson crossflow

    Last year I started noticing from time to time some rust on the lower left spark plug and suspected a problem. Well the problem didn't just go away, in April my motor froze up and I had to tear it down and rebuild it. I suspected the water got in through the exhaust cover/manifold and was about...
  15. G

    Does anybody know of a marine salvage yard near Central Florida?

    I need an inner exhaust cover for a 90s model crossflow v4. It's going to be an expensive part to purchase a new one. I'd love to find one off a parted out motor.
  16. G

    Winterizing my boat?

    Just kidding I'm in Florida and saw all the winterizing threads and thought I'd take the opportunity to rub it in. I'm going fishing in the morning.
  17. G

    Ramp traction?

    Being a Floridian I have been launching boats for 40 years now and over the years have had a few bouts with traction on a slippery boat ramp. Not many but a few. However the truck/boat combo I currently have does not do real good on a steep/slippery ramp. Of the 10 or 12 ramps I commonly use 2...
  18. G

    How to control mildew?

    Here in Florida our humidity is probably worse than maybe 49 other states. Anyway last year my boat was down for the year and I parked it under an oak tree. It collected leaves and bread mosquitos for a year. When I cleaned it up I had mildew growing everywhere. I scrubed and pressure washed for...
  19. G

    I think we made the right choice.

    Took the day off work and took my grandaughter on a last week before school starts fishing trip today. My wife, grandaughter, son and I went over to Mosquito Lagoon and launched out of the small town of Edgewater. We picked up a few dozen shrimp at the marina just south of Edgewater and headded...
  20. G

    My frankenstein monster

    From the lower unit up my outboard is a 98 115 Johnson. My gearcase came from a junkyard and I was told it was off of an 89 115. However I believe it is from a late 70s model. I believe from 82 forward lower units had a sacrificial anode and mine has no sacrificial anode. However the water pump...
Top