Search results

  1. P

    anybody own a powerdrive T/M

    I just picked up an older powerdrive unit model 724 with 48 lbs 24v<br />I was wondering if anybody had powerdrive and how they liked them and do the older units like mine early 90's have any form of breakaway mount? I am just tryin to figure out how much pressure it will take to knock the...
  2. P

    trolling motor mount

    I have a bow mount minn kota power drive with a quick disconnect bracket that I want to mount on my procraft My question is this , has anybody used the "quick nuts" made by minnkota to anchor their t/m I didn't know if that type of molly bolt would put too much strain on the fiberglass and...
  3. P

    fast idle lever

    I just took the boat in for service and had the mechanic adjust the idle , well now the idle is right but now when I raise the fast idle lever it hardly advances the idle! almost like the cable is slipping, also when I put it in reverse the throttle has almost no effect from low to full...
  4. P

    disconnected vro... maybe

    I took my 1985 procraft 90 hp evinrude in to a local marine and had my vro disconnected by the owner , who is well thought of around here been in business a good number of yrs. well from reading here on the forum I had a perty good idea how but I felt more comfortable with a mechanic doing it...
  5. P

    gas tank size

    I just picked up a 1985 procraft fish and ski 16 1/2 ft pro V does anyone know the size of the gas tank on this model is it 12 or 18?<br /><br />thnx<br />mark
  6. P

    trolling motor plug

    I have an older mk troller that i am replacing with a power drive but the plug on the older model has 3 wires to the plug and the power drive only has 2 any ideas?<br /><br />mark
  7. P

    prop nut how tight?

    Ever since i had to remove the prop and replace I am getting water in the LU even running on the hose .Is there a torgue setting for this , I didn't really tighten it much because i could swore i read on here to just snug it up?<br />any ideas?<br /><br />84 90hp rude<br /><br />mark
  8. P

    finding structure with a finder

    posted 02-22-2003 11:02 AM <br />--------------------------------------------------------------------------------<br />This is something that i wondered about for a long time and there is little info on it.<br />when trying to define the area of submerged structure such as...
  9. P

    minnkota power-drive

    Well i just picked up a 48lb power drive 24 volt about 4-5 yrs old for $100 it seems to run allright , anybody have experience with these motors, and am i going to regret picking this boy up? lol I think it is 4wh dr. turbo seriesAnybody have the specs on this unit ,guy i bought it from said it...
  10. P

    propshaft seals

    can water water get into the lower unit if the nut holding the prop is not real tight? and how tight should it be?<br /><br />thnx,<br />mark
  11. P

    is my procraft coming apart?

    I have a 1985 procraft 1650proV I think it is the fish -ski model, my question is this I just noticed that i can press the top of the deck down about a quarter of an inch before it hits the inside of the rail , this is right up in the nose and you can push it down alittle bit a couple of feet...
  12. P

    Am I crazy!

    Is it just me that thinks that putting a primer bulb on the vro tank is just asking for trouble. I just purchased a 1985 procraft with a 90hp vro, and I keep thinking about how I used to lose prime on my gas line from time to time on my previous boat.From what I have read in this forum is that...
  13. P

    what size wire?

    Hi all i am going to wire my trolling batteries in series and i was wondering what gauge wire is sufficient for the jumper?<br /><br />thnx,<br />mark
  14. P

    red oilin vro tank?

    Hi guys i just bought a used boat with a 90hp rude and i forgot to find out the oil the previous owner had used , the oil in the vro tank is dark red any ideas?<br /><br />thnx, mark
  15. P

    trolling motor blues

    posted September 22, 2002 08:43 PM <br />--------------------------------------------------------------------------------<br />another question as it is tuff being a mechanical tard:)<br /><br />I have a old 595 minnkota bow mount 36 lbs thrust my question is this when i run it...
  16. P

    trolling motor blues

    another question as it is tuff being a mechanical tard:)<br /><br />I have a old 595 minnkota bow mount 36 lbs thrust my question is this when i run it out of the water it turns what I think is way slow I have an 37 lb bow mount motor guide and ran it off the same battery to compare it and...
  17. P

    vro oil tank

    hi all!<br /><br /> <br /><br /> I just bought a 85procraft with a 90hp vro. well on top of the 1.8gallon oil tank there is a set of 5 holes where it looks like something is supposed to screw in. The plastic piece that holds the hose looks like it has 4 screws holding it on. any ideas on...
  18. P

    couple of questions

    I just purchased a 1985 procraft 1650v with a 90hp rude vro and I noticed the prop shaft nut was loose enuff that I could move it by hand limited of course by the cotter pin, my question is how tight should that be torqued down and does it do any harm by being abit loose ? <br /><br />Also on...
  19. P

    Do I hace an altenator?

    I just got a 1985 90 hp evinrude vro does this motor have an alternator to charge the start battery?<br /><br />thnx<br />mark
  20. P

    another vro question

    Hi all I just got a 85 procraft with a 90hp vro rudeand my question is this, I thought i read in the owners manual that the low oil buzzer or chime would go off when i turn the key not necessarily start it, but i don't hear a thing, also does the low oil warning indictate low oil in the tank or...
Top