Search results

  1. produceguy

    custom base for seats

    Hello gentelmen and ladies. I just bought 4 junp seats for my cuddy and now I need some ideas for the base. The base that came with the seats are 10 inches high and that is fine for the 2 faceing the transom but the 2 faceing forward need to be twice that hight. If you didn't figure it out I...
  2. produceguy

    Can this be fixed?

    I'm considering buying this boat and trying to fix it. What do you guys think? I was going to offer $500, http://tucson.craigslist.org/boa/2641416245.html
  3. produceguy

    Smoke!!!

    We took the boat out a couple of weeks ago and at high rpms we smelt exhaust and then seen white smoke, coumdn't tell were it was coming from and the temp gauge was fine. Got home and pulled the lower unit and found shard pieces of the flapper. Cleaned it out and took the boat out again and same...
  4. produceguy

    Frustrated!!!

    Bad day boating for us today. Took a friend and my son out fishing today and as I got the rpms up we started smelling something burning. I shut her down and seen some smoke but couldn't tell were it was coming from so we thru out the anchor to let her cool off and do some fishing, temp gauge...
  5. produceguy

    Oops

    I was thinkink that 75% of the folks in the restoration section ask on how to check for rot in the boats. Would it be a good ideal to post on how to do drill tests on deck,stringers and transom and maybe the mods will use it for a stickey? Just a thought for you oops. Your directions really...
  6. produceguy

    Is this a sleekcraft?

    http://phoenix.craigslist.org/nph/boa/2565992707.html Call me crazy but if he had a title I would go look at it.
  7. produceguy

    latex paint on trailer?

    I'm painting my trailer and was wondering if I can use latex paint . What do you think? They make some for outdoors and it says it's good to paint metal but I just don't know about the latex.
  8. produceguy

    huge fish

    http://www.bing.com/images/search?q=cuddy+cabin+boat+pics&view=detail&id=9B32CFDBF3A89356D9DF7F12BDBD552D1FFD9CD0&first=931&qpvt=cuddy+cabin+boat+pics&FORM=IDFRIR Came across this pic searching the net.
  9. produceguy

    Mma/ ufc

    I met Cain Valaskas grandma yesterday at work. I ask her to bring him by the store sometime and she said she would. Thought it was pretty cool. Anybody else out their a fan.
  10. produceguy

    New temp gauge.

    I bought a new 7 piece eclipse boat gauge set and upon arrivel I noticed that the temp gauge needle is on about the 200 degree mark. I haven't installed it and was just wondering if this is normal for a new temp gauge? I looked on the back to see if I could adjust it but cann't. Thanks guys.
  11. produceguy

    cardboard boat gauge panel

    Here is my latest project. I'm very excited to do this one because it's something I've wanted to do for a year or so and I'm finally starting it. This is were I'm at. I ordered a 7 piece gauge set( Eclipse series ) to redo and redesign my dash. I'm useing cardboard and maybe foam to design...
  12. produceguy

    glassing over polyurathane sealent?

    Will it hold? If I use poly resin?
  13. produceguy

    promo code

    What's the new promo code? THANKS GUYS.
  14. produceguy

    Treat or not treat marine grade ply

    I went to a boat shop a few days ago and they was redoing the interior on a pontoon boat and under the boat was bare wood. I asked the guy that was their if it needed resin or something to seal it and he told me no because it was mgp. Just curious.
  15. produceguy

    Engine water pump?

    Alpha1 Gen 1, 4.3 Mercruiser I have a pulley that is loose and every now and then it locks up. I have ruled out the crankshaft pully and the alternater pulley, Is their a engine waterpump in my motor? I have looked in my manul but it only shows one for a v8 not a v6. I have also tried to find...
  16. produceguy

    problems with 4.3 mercruser

    We went out on the lake the other day and dropped her in the water,she fired right up and away we went. I started smelling some wires burning so I shut the boat off and started looking for the bad wire.Couldn,t find it so I tryed to start her back up and head to the dock,she would start but when...
  17. produceguy

    another swimplatform

    Just wanted to share this with you guys. The kids and I wanted a swimplatform but they are to much $. So, I made one out of redwood,70$ and then I had some brackets made 120$ metal but powder coated. Sealed the platform with cabot. Thank you woodonglass.
  18. produceguy

    swim platform brackets

    How can I measure the angle of the transom for L brackets and make my platform level? Should the trailer be level? Should the boat be level? I know were the water line is but how can you determine how to make it level when trailered? I have put a level on it but if the boat sits in the water...
  19. produceguy

    Wood decks

    Has anyone out their ever not painted or placed carpet on their deck and just went with the natraul grain look. I look at all these threads were we do all this work in replacing the decks and to me the plain wood with that coat of shiney resin looks so nice but slippery. Could someone even...
  20. produceguy

    Rattling

    I tryed to post a vid of the noise but can't figure it out so I'll just ask. It's the first two vids in my album. http://s1111.photobucket.com/albums/h473/produceguy2/ I replaced my impeller so I dropped the lower unit( 4.3 Mer, Alpha 1 Gen 1) and the tube ( WATER TUBE ?) was loose. I...
Top