Search results

  1. brian3127

    ? about seafoam

    i have a 40 johnson 1975 im im useing deepcreep sea foam spraying it into the carb and into the combustion chambers will it stop smokeing when all the carbon is gone or will it keep smokeing everytime i spray it.
  2. brian3127

    rpm at idle

    what should the rpms be at when engine is a a idle? i get it to about 1,000 before it stalls. should it be lower?
  3. brian3127

    just used seafoam

    (johnson 40 hp 1975) just got done using seafoam. i didnt go with the extra tank i got a can of the spray. i sprayed it into the intake let it run for about a minute then turned it off. took the plugs out and sprayed some in there. and let it sit for about 5 minutes. then i started it. let it...
  4. brian3127

    1975 johnson 40hp outboard motor flooded?

    took the boat out today got it to the water ran good at low idle. then i got out of the no wake zone. i gave it all she had. we were going at a good pace. got about half way across the lake then the engine spit and sputtered and stalled out. tried to start it back up again and it turned over...
  5. brian3127

    prime and paint

    i have read on here that once you fix a hole with fiberglass that you should prime and paint it what kind of primer and paint should i use
  6. brian3127

    solenoid wireing

    i have a white wire on the s going back to the key then i have another white wire fron the t or i of the solenoid going back to the nuetral safety switch. looks like something else can be pluged to the nuetral switch. there are 2 slide connectors on the nuetral switch the wite wire is on that...
  7. brian3127

    johnson 40 hp wir problem

    i just bought a 15ft with a 1975 or 76 johnson 40 hp outboard motor. im haveing problems with the wireing at the key. i found the power wire that runs to the switch there is an inline fuse that was blown i cahnged it then i tried statring it. and the fuse blew. so that makes me think the switch...
View older results
Top