Search results

  1. Oshkosh1

    Wet-v-Dry tune up adjustments on MC165 I6

    Hi all... So I have my boat up and running well so far. One pump of the throttle and it fires up and idles without hesitation. Ran it up to 2500 RPM...immediate throttle response and no signs of stumble whatsoever. I've set the dwell(31deg) and the idle(580RPM...in gear). I know I need to...
  2. Oshkosh1

    Priming fuel system Mercruiser 165/I6

    Hi all... I replaced the carb(new Rochester 2GC), installed a new fuel filter in the mechanical fuel pump, and installed a new fuel/water seperator. I filled the seperator filter with gas but I need to know how to prime the remainder of the system as I'm getting no fuel to the carb. Thanks in...
  3. Oshkosh1

    Merc 110(9.8Hp) Impeller replacement

    Had the Panfish Slayer out and figured that I should replace the water pump/impeller this year. I've never done it, although my father(who bought it new in about 1974 or so), always had it serviced regularly. There are no issues with it, and I do get a good stream of water...but, "an ounce of...
  4. Oshkosh1

    Prop ???'s for Inline 6

    So I was reading the factory manual (from 1973) last night...which is the year of the motor in my 1985, 19' Wellcraft. Just reading about the prop recomendations in the appendix...and it stated that a 17-19' boat should turn between a 14.5 and 15.5 inch/21-23 pitch Aluminum prop. I'm running...
  5. Oshkosh1

    Lowrance M68c Thoughts/Opinions/User experience.

    Found this GPS/Finder. http://www.gandermountain.com/modperl/product/details.cgi?pdesc=Lowrance-Color-M68C-Combo-Plotter/Sounder&i=92704&aID=504E2&merchID=4006 Any thoughts or experience with this model? I see that it's on sale and have read some other favorable reviews... I would like to...
  6. Oshkosh1

    Outdrive pressure testing

    I've got my drive back together and would like to pressure test to confirm all is well. I'm assuming most of the testing equipment is homemade, so what seems to be the favored method/design? I have a compressor and/or a bike pump, as I've heard of both being used. I'm currently away from...
  7. Oshkosh1

    Alpha one lower unit fitment

    A local guy has an Alpha one lower unit for sale...price is $200. He says it's in good condition with only a little normal scuffing on the skeg. He didn't state whether or not it's from a "Gen 1 or Gen 2"... I know the upper units are different, are the lower units interchangeable, and is...
  8. Oshkosh1

    Pertronix ignition conversion for Mercruiser 165 I6

    I've read many posts regarding the conversion from points. I will be purchasing the Pertronix Ignitor II(91163A). So... What modifications to my coil-distributor wiring do I need to make? I've read that I DO need a new coil... I've read that I DON'T need a new coil. Soooo...whats it...
  9. Oshkosh1

    Transom Rebuild...

    Is this worth the money to have the transom rebuilt? They're asking only $2500 If so, what's a ballpark figure? Thanks.
  10. Oshkosh1

    Alpha One upper gearcase seal replacement

    The Pic you see is looking "up" into my upper unit. As you can see it's toast. I bought a complete Mallory upper seal kit from iboats and believe that this would be included. How is the best way to get this thing out and the new one in properly? Also...what IS the correct nomenclature of...
  11. Oshkosh1

    Inline 6 valve sequence...

    When looking forward to aft beginning with #1...what is the sequence of the intake/exhaust valves on my engine? I THOUGHT is was E/I/ I/E/ E/I/ I/E/ E/I/ I/E... Want to double check. Thanks
  12. Oshkosh1

    Inline 6 Exhaust manifold drain plug

    My exhaust manifold drain plug(one on the underside...directly above the engine petcock) is AFU. My local marina's arrogant parts "pro" not only couldn't help me...but questioned whether Mercury even MADE such a motor, so obviously no help. Any idea where I can get a replacement...or can I...
  13. Oshkosh1

    "New Found" winterizing method...250CID/I6

    So...Here's what I've done to winterize my engine. 1. Drained the block/manifold 2. Removed thermostat/thermostat cover/hose to manifold 3. Used compressed air to "blow" out the following: Block(through thermostat housing), Manifold(through opening from removing the hose), and Coolant water...
  14. Oshkosh1

    Trouble getting Apha one lower back in...

    Tried all of the "tricks" still can't get it in. So... I'm thinking of removing the upper also and storing the whole works in the basement anyway... Should I(can I) just go ahead and remove the upper right now and THEN assemble it on the bench? Will this method be easier than trying to muscle...
  15. Oshkosh1

    Drain locations on GM250 CID I6...

    About time to winterize here in NE Wisconsin... How many, and where are the locations of the drains on my engine/manifold/riser. Also, I'm reading conflicting reports of whether or not to use anti freeze or not. The way I understand it, with this motor as long as I drain it completely there...
  16. Oshkosh1

    Trim quandry...part deux.

    So looking through EVERY possible schematic available, I have not found my setup for trim wiring. I suppose it was unique to Wellcraft or something. What I have is a dash mounted, two rocker button(top is "Tilt"...a momentary on/off) (bottom is "Trim up/Down"...a momentary on/off/momentary...
  17. Oshkosh1

    Power trim/tilt issues...

    Here's the story... I have an 85 Wellcraft with a two rocker switch, instrument panel mounted trim/tilt setup. The upper is "Tilt" the lower "Trim" So... I could use the bottom rocker(trim) to lower the unit...which it did without hesitation, until recently Using the bottom rocker(pushing...
  18. Oshkosh1

    Power trim issue..

    Here's the story... I have an 85 Wellcraft with a two rocker switch, panel mounted trim/tilt setup. So... I could use the bottom rocker(trim) to lower the unit. Using the bottom rocker to raise the unit did nothing so I just used the upper rocker(tilt) to raise the unit on demand. I...
  19. Oshkosh1

    Dead in the water

    Had my boat out today...19' Wellcraft/230 I6/Merc Alpha 1...Ran great all day, then "Boom goes the dynamite". I was slowing down to a No Wake zone and went to idle, then the engine died. I could crank it...but no fire. I waited 20 min...nothing. I pulled a couple of plugs to see if they were...
  20. Oshkosh1

    1985 Wellcraft 190 American questions

    Hi all... I've been "lurking" for some time since I bought my boat. It's an 85 Wellcraft with a late 60's Chevy 230CID, 2bbl Rochester and Merc Alpha one drive. It seems the engine was rebuilt and after pulling and replacing all of the plugs, all of the cylinders seem to be in good working...
Top