Search results

  1. JJB

    Need to run without oil injection hooked up

    How do I run my 175 Johnson without my oil injection hooked up . I want to start it and I dont have it complety installed on the boat but want to run it during the next few weeks . I have the battery and a wiring harnest and key sw hooked up . It was rebuilt and I want to keep things moving...
  2. JJB

    Transom replacment info ?

    I am looing for a good web page or book on detailed transom and fiberglass replacement . Thanks JJB
  3. JJB

    What is the Best 21 ' boat to buy ?

    I may be in the market to buy a 21' open fishing type or cuddy walk around hull due to finding water in my bayliner transom . I wanted to get some input from everone on a good older soild hull . The info on this site is the best !!! Thank's again everyone . JJB
  4. JJB

    Transom problems !

    Transom problems ! I just did some test drilling and found wet and black wood in the left side Motor mount top and bottom . it seems to be wet very deep and the boat has been out of the water for 6 months .some water came out when I was drilling the transom . Is there a way to dry it out or...
  5. JJB

    GPH for a Johnson 2000 175 ?

    I looking for a fuel/ water filter and wanted to know what GPH I need for a 175 hp . I was looking at some of the spin on filters and they were either The 1/4 " model is 50 gph and the 3/8 " is 85 gph . which should I buy ? Thanks JJB
  6. JJB

    2000 Johnson 175 oil tank placement ?

    How far from the engine can you mount the oil tank ? I have a cuddy cabin and it would mount nice under the step in the cabin , if thats not to far . Its about a 16 ' run to the engine !
  7. JJB

    How tight should the 175 Johnson mounting bolts be ?

    I mounting a Johnson 175 to my boat and wanted to know if there a torque value for mounting bolts . I dont want to crack the glass and dont want it to be loose . Thanks JJb
  8. JJB

    using a Transom Plate to protect from damage ?

    I am changing my motor from a 150 force to a 175 Johnson . I notice on the Right lower engine mount the glass is recessed a bit .I am going to fill it in but I wanted to beef it up a little by putting a plate on the outside . Should it be made of ss or alum. ? And what thickness and size...
  9. JJB

    What Kind of bolts are used to mount Outboard's ?

    I am replacing my force ob with a Johnson and wanted to know what type of Bolts to use on it . The ones I have taken out seem to be very light like aluminun and not ss . What is the right bolt to use ? and is marien -tex ok to fill old holes with ? Thanks JJB
  10. JJB

    2000 175 Johnson wiring harnest

    I am mounting a 2000 Johnson ocean pro carbed 175 ob in place of a force . I need the boat side wiring harnest and any other wiring harnest that may be needed for the change out . Does anyone know the omc part # for that harnest and where I can get it ? My control is a morris top mount single...
  11. JJB

    What KInd Prop for a 175 Johnson OB ?

    Hey Guy's I went with the used OB I just received my 2000 total rebuilt 175 Johnson , a Nice clean one I must say . I am looking to put a ss prop on it . I have a 20' bayliner and do run offshore a lot and troll . How are those 4 blade props ? Does anyone know it they do allow you to plane off...
  12. JJB

    Wax or paint the boat ?

    I have a 1991 20 " bayliner trophey in great shape, it was always trailer . The bottom has a few small nick and gouge spots that need some repair . I think The Hull should wax out good But ! I though since it was a 16 yo boat and never painted before , I might be better off just having the...
  13. JJB

    Is there a way to run a two stroke kicker ?

    If I have a 4 stroke engine and wanted to use a 2 stroke kicker that I have . I wanted to use my main gas tank for both . Is there any device that is out there that let me use my 2stroke kicker with out taking a small tank with me ? Thanks JJB
  14. JJB

    Which to buy ? The Suziki 2007 140 four stroke vrs e-tec 150

    Has anyone heard anything good or bad about the 2007 140 suzuki 4 stroke . I have heard that 4 strokes have lots of maintenance to do on them ! valve and chain adj. ect. I have also heard that when salt water used it plays hell on the valve seats ! True ? I don't know which one to buy now ! 4...
  15. JJB

    The 2007 140 suzuki four stroke ?

    The 2007 140 suzuki four stroke ? Has anyone heard anything good or bad about the 2007 140 suzuki 4 stroke . I have heard that 4 strokes have lots of maintance to do on them ! valve and chain adj. ect. I have also heard that when salt water used it plays hell on the valve seats ! True ...
  16. JJB

    !50 Johnson from a rebuilder !

    I am looking at a Johnson 150 rebuild from a rebuilding co . called Blackbird industry in PA . Anybody have any info or exp with them ? Thank's JJB
  17. JJB

    Can a JackPlate be used for this ?

    I need to repower my boat and I was told that the old holes don't line up with my new Johnson engine . Can I use a jackplate to solve this problem ?I dont need to lower the engine just line up holes . Instead of filling and re drilling the holes that are so close to old ones . JJB
View older results
Top