Search results

  1. S

    84 Evinrude 25hp Link and Sync clarification

    Compression is 110-115 on both. This is pull start too which is not the easiest. I'd think with electric start the numbers would be higher. I think these are what you're asking for. I adjusted the nut on the rod back some towards the plastic stop. Prior to this it was just over 1/4" away...
  2. S

    84 Evinrude 25hp Link and Sync clarification

    To add to this, I'm wondering if the manual is wrong. It's calling out the primary pickup location on the 30 and 35hp models as between the 2 marks. Would they really have different setups on nearly the same motor?
  3. S

    84 Evinrude 25hp Link and Sync clarification

    Hello All, Model # E25RLCRD. I purchased this motor for cheap last year and have so far replaced all the fuel lines, rebuilt the fuel pump and carb, replaced the thermostat, cleaned inside the hood/cowlings and rebuild the lower unit with all new seals and a new-to-me prop shaft. It starts...
  4. S

    1984 Evinrude 25hp - lower unit rebuild and cooling system check

    Hello All, I purchased the subject motor (E25RLCRD) last summer for use on an 81 Mirrocraft 14' I'm also refinishing. The motor ran, idled OK, peed some water and shifted in and out of F-N-R just fine. Compression was right around 110 on both cylinders using pull-start (no E start). Lower...
  5. S

    lone star medallion

    Re: lone star medallion
  6. S

    63 Lonestar Medallion restoration

    Re: 63 Lonestar Medallion restoration So I had a chance to work on the boat again this weekend. A lot of the paint was stripped off and just some general cleaning was done. I was thinking of what I could do about the transom wood when my father in law, who's helping me, pointed pout that I...
  7. S

    63 Lonestar Medallion restoration

    Re: 63 Lonestar Medallion restoration That's a good idea Bob_VT, I never thought of it being attached through the bottom. I'll take a look at that next chance I get. I don't see any way possible that the wood will come out through the top. The splash-well wraps around the top 4-5" of the wood...
  8. S

    63 Lonestar Medallion restoration

    Hi everybody. I created a post last fall when I bought this boat and was met with some great information. Much thanks to everyone who helped. With the warmer weather I've just begun working again on the Lone Star. This past weekend I removed all the hardware and began stripping the paint with...
  9. S

    Lone Star Medallion questions

    Re: Lone Star Medallion questions Thanks "The Bush" It seems like a 90 might be overkill. I'm thinking a 60 or 70 would do it just fine. The transom is aluminum with a wood core. I just described it incorrectly in the previous post. I've attached a close(r) up photo of the transom for your...
  10. S

    Lone Star Medallion questions

    Hi all, Just purchased a lone star Medallion (according to tag, see pictures) for cheap. It's in need of a good cleaning, paint, decking, motor w/ controls, etc. I'm looking to restore it but had a few questions first. 1. What's the best option for decking? marine grade plywood w/ carpeting...
View older results
Top