Search results

  1. MJS

    gauges jumping

    My tach and gas gauge jump sometimes but not all the time. Sometimes the tach jumps to 65k when there is no change in rpm. A quick tap in the glass brings it back down to where it should be. Sometimes they just bounce all over the place. Whats up with that? Also sthe speedometer doesnt...
  2. MJS

    Three Q's

    I want to mount a kicker on a '19 1990 bayliner CC with a 120 on it. I have a 2hp Evinrude. Is that enough to troll with? If the E2 is enough would a metal plate mounted to the transom with a wood block (2x8 or plywood) attached to it be strong enough? My father in law is giving me his old...
  3. MJS

    E2

    '74 E2, does it have a water pump that needs changing like larger outboards?
  4. MJS

    fouling on plugs

    1990 force 120 I have to keep cleaning plugs after each trip to the lake. I didnt do it once and it left me sitting a few miles from the marina and had to be towed back. The carbon builds up, but you can pull them and scrape it off with your fingernail, pop it back in and off you go. Now I...
  5. MJS

    120/ 125 force

    I have a chance to buy a parts motor. Will a 1990 force 125 have enough parts that fit my 1990 120 like the carbs starter lower unit and what else?
  6. MJS

    1990 bayliner trophy saltshaker w/120 force

    Got the new to me boat up and running today and out on the lake. 1) the wife and are are starting this new thing called a budget so I doubt ill get to fill the boat up with fuel to do my own test. If you have the same boat or something close what rpm gets the best mileage. 2) Taking on...
  7. MJS

    yet another tilt/trim Q.

    1990 120hp. Bleeds down slowly. No external leak. 1) Would it likley be the pump rather than a cylinder? 2) What is the pentagon shaped thing with the silver rod that the motor rests on? It has a hydrolic line to it, but does not move. 3) Recently the motor started clicking instead of...
  8. MJS

    heat sensor and alarm

    I need both the sensor and alarm for a 1990 force 120. I haven't had any luck searching the web. Any help? The buzzer is bad and wont sound. I tried to wire it directly to the battery and nothing happened. I put a test light between the wires that go to the buzzer and heated the sensor up...
  9. MJS

    impeller shopping

    I just got a 19boat ft byliner cc with a force 120, '90 model. Im going to put a new pump in but don't know much about it. Do I have a 120, or a 120L drive? What's the difference.
  10. MJS

    grouper

    me and some friends on 8/1/09 topsail, sorry cant get the pic to load here, click on this link http://www.nchuntandfish.com/forums/showthread.php?t=21024
  11. MJS

    idle speed on a 2402E

    I took my 2402E out crappie fishing saturday and used it to troll around with some jigs. The motor ran well for not having been run for a few years, and it is new to me so I dont know the history on it. At low speeds however it would run for 5-15 minuted then cut off. If it cut off on its own...
  12. MJS

    choke problem

    this may be similar to a post I read before, but a friend has a mid 90's 5 hp johnson. The motor will start on first pull with choke pulled out and will run fairly well at around half choke. With the choke pushed all the way in it will usually die, but sometimes idle, it will die if any...
  13. MJS

    cooling system

    I just bought a 74 evinrude 2 hp. Is the amount of water pushed out by the exaust in this video about par for my motor or should there be more? the video is of a susuki. http://www.youtube.com/watch?v=2oZECTzFCYM&feature=related
View older results
Top