Search results

  1. LindenLongRods

    1971 18HP Evinrude Fastwin

    Is my nozzle missing something?? I'm watching youtube videos and all the carbs have a smaller brass tube inside the nozzle
  2. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Well I'm in NJ so I'm at the mercy of whatever season gas they want to use, there is though 10 Gas stations in the state that do sell it. I will have to use sta-bil
  3. LindenLongRods

    1971 18HP Evinrude Fastwin

    So the nozzle does not need to be removed? I took out the main jet. What about piece #35 not 45 Bridge needle valve, the little piece inside
  4. LindenLongRods

    1971 18HP Evinrude Fastwin

    Passed reed test, rebuilding carburetor, soaking now. Does the main brass jet come out? part #45 bridge needle valve, does that need to come out? Any suggestions. I also took caps off this time, how hard do the new ones need to be tapped back in? Just so they sit tight?
  5. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    ok
  6. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    How do I obtain?
  7. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Hey since I'm running this motor after having to clean carb to get running, is there any fuel additive recommended? Seafoam or some other gumout product. What about a couple squirts of Carb cleaner. I feel that stuff it kind of harsh for rubber pieces in carb
  8. LindenLongRods

    1971 18HP Evinrude Fastwin

    Ok
  9. LindenLongRods

    1971 18HP Evinrude Fastwin

    Leak down test was succesful, no leaks I did that already
  10. LindenLongRods

    1971 18HP Evinrude Fastwin

    OK I did the leak down test. Pretty sure I did it right. No leaks and compression is 119 on both cylinders. I'm going to rebuild carb again any other suggestions? Reed test?
  11. LindenLongRods

    Help with tilt/trim motor

    Trixies in Barnegat, they used to have alot of used parts, but I definetly would try to fix myself.
  12. LindenLongRods

    Evinrude 15 hp no compression

    Do what they say, This a great site
  13. LindenLongRods

    15hp evenrude two stroke

    you're not clear what you want, Just replace Impellor plate comes with some kits. If you want a pic of the inside of the lower unit with the water pump removed?
  14. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Thanks for all your help, I did the tooth paste trick, pick up tiny bristle brushes that were like pipecleaners also
  15. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Alright everyone!! It Was the Carb, cleaned the crap out it, sprayed and blew it down. Thank you so much for your help!!
  16. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Do you take out the needle seat also? Do you know of a step by step video on youtube or where I can get a service manual?
  17. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Do you take out the needle seat also? Do you know of a step by step video on youtube or where I can get a service manual?
  18. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    Thanks so much for the replies. I will soak Monday overnight in laquer thinner, or is that too aggressive?
  19. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    I took carburetor off before I left work so I will work on it Monday when I get back I will let you know how I make out,Thank you Sir
  20. LindenLongRods

    Tohatsu 2012 15 Hp Floods

    It is Carburatted the Tahotsu 2012 15 HP four stroke mfs15c. The model is fuel injected. Someone has said maybe the carb needle is stuck take it apart and clean the **** out of it. Question is, does that regulate the gas flow also? It just seems way too much gas.
Top