Search results

  1. S

    Electric dummy

    Re: Electric dummy Here it is... I believe i have it correct but when i put it inline with the negative even with a bilge on it does not register a draw.
  2. S

    Electric dummy

    I have always suspected that i had a battery drain somewhere... So I went and got an amp meter and boy I don't know what I am doing. I only I have the motor cables and the cables from my fuse box attached at battery. Now please clarify in dummy words how I check each cable to see If there is a...
  3. S

    Plastic gas tank leak

    I believe I I targeted my leak and it's not the tank but the connection to the hoses.. But my question is it looks like its coming from between the plastic of the tank and the metal fitting? I will replace hoses and put new plumber tape on all the threads but is there supposed to be a seal...
  4. S

    70hp eating up my battery??

    so i have a 1993 70hp johnson that i had trouble with on the lake the other day. Ok so i get to the launch and i go to start it and and i got to trim it down and it goes down. Then i hear the tilt and trim motor continuously running... but not doing anything cause it seems to be all the way...
  5. S

    runs in barrel and crap on the lake? help

    so i have a 1990 6hp evinrude that runs like a dam dream in a barrel and then when i get it out on lake will only run at high rpms. it is the same combo of gas tank, hose and motor. I just dont understand? Kind of stumped... Thoughts?
  6. S

    water pump replacement on 9.9 j10rena johnson

    i replaced my water pump on my johnson for the first time... got her hooked up and boom water! yeah i did it correct! wait the water is really not shooting out with velocity like my other outboards. It just kind of pours out.... Did i do something wrong you think or something else a issue? could...
  7. S

    how much water is to little?

    i have a 9.9 1992 j10rena johnson i just bought and when going over everything. I notice that with muffs or in a barrel water just lightly trickles out. Not a steady powerfull stream on my past motors. I did check the water pump and the impellor does not look to be shot. i did order a...
  8. S

    what year nissan 90hp? pic included

    I am working on getting serial and model number but does anybody know when they started using this paint scheme????
  9. S

    1992 90hp nissan

    anybody have experience with this motor. I have none and wondering the good bad and the ugly about this engine?????
  10. S

    1996 125hp mariner questions?

    I was looking at a 125hp mariner on a boat i was looking to purchase. Can any of you fantastic guys/gals out there let me know the good bad and of course the ugly surrounding that year or the mariner brand in general? I have always had johnson/evinrude motors so very unfamiliar with...
  11. S

    bow rides really high

    so here is question. My bow rides very high when on plane? I took off a jack plate last year because i didnt like how low my boat sat in the water and and somebody suggested that would help and i really didnt need a jack plate. so i did that and now my front end feels so high when on plane...
  12. S

    weight on a 84 22ft grady?

    what do you think a 22 ft 1984 grady white with trailer would weigh? just wondering if my grand cherokee 3.7 would be up to the task with out dropping its tranny
  13. S

    ficht only running at high rpms

    i had a lot of water in my gas tank. I pumped it out to the best of my ability. I filled it back up again and pumped out a couple test fills and there a couple of drops of h20 at the bottom a Gatorade bottle. Is this a huge issue? Also its a johnson 115 ficht and the reason i ask is because...
  14. S

    1998 115hp ficht johnson

    so i had water in my gas tank. I drained it completely and including hose from tank to engine. I had been doing other work on engine and been running the engine on a separate tank, running fine. I get all water out of tank and fill her up again and connect the hose. i was thinking i should...
  15. S

    crestliner sportfish owners help

    Hopefully somebody can help me. My walk thru on my 1998 sportfish was destroyed and now i am trying to locate one. I think i found one but the guy wants measurements from me but i don't have the center windshield frame anymore. Can somebody measure their middle windshield and let me know how...
  16. S

    crestliner phantom???

    anybody have pics of a crestliner phantom round 1996??? Especially the windshield... I need a replacement for my 1998 sportfish and i don't want to drive 4 hours to find out its not what i need. thanks
  17. S

    Can the set back on a jack plate screw your boat up?

    i purchased a 98 crestliner with a jack plate mounting my 115hp johnson to it. My question is that my boat sits so low in the back that the water comes in my drain holes in the spill way when floating in water. My question is "could extending my motor almost 8-10 further back off of my transom...
  18. S

    does the 1/4 going to make a difference

    I have a 14 * 21 prop right now. My dealer wants to put a 14 1/4 * 21 on there. Is this a big difference? Also i have a 1998 johnson 115 hp fast strike, do i need a 15 or 13 tooth spine?
  19. S

    1998 sportfish owners

    Can some of owners out there please pm or discuss how your boat floats in the water. MY water line in the back is right up almost overflowing into my spill way.... thought this is quite odd. It actually comes through the drain holes. I feel this could be a safety hazard if something happens...
  20. S

    whats the official name for this??

    what is the official name for this round cover in this pic. This is not my boat thank god but an exact model that i found online. lost mine and need a replacement but can't find one due to i don't know what they are called????
Top