Search results

  1. P

    Homemade Rubber Motor Mount???

    Has anyone ever tried this before? I have a 1975 Evinrude 25 and the center rubber mount broke in half a couple of months ago when I was disassembling the engine for rebuild. Now, the motor bounces all over the place and the two lower mounts are taking a beating! This mount looks pretty easy to...
  2. P

    90HP V4 stumbles when tilting engine down

    My 1989 90HP Evinrude seems to be having an idle issue. Wondering if anyone has experienced something similar to this as I am thinking the carb floats may be the cause. Engine idles fine whether it is in the water or out the water on flush muffs. When you tilt the motor down, the engine wants...
  3. P

    Evinrude V4 leaking oil around prop

    My Evinrude has been sitting up lately, suspended from an engine hoist. I am currently getting the transom ready for Seacast, but have ran into a problem. My motor is leaking oil from around the prop and it is NOT unburned premix oil, it is definitely gear case oil. It has never leaked oil...
  4. P

    Skeeter SD-80 w/90 Evinrude Prop Question

    Hello Everyone! I have a 1990 Skeeter SD-80 with a 90 HP Evinrude (1989 Model.) The boat is 15.25 Ft long and weighs 800 lbs. empty, according to specs. I am currently running a 13 3/8" x 17" stainless OMC prop. Top speed is 42 MPH @ 4900 RPM's, fully trimmed WOT. I recently changed the prop...
  5. P

    1975 25 HP Evinrude Head Compatability

    Hello Everyone, I have a 1975 Evinrude 25 I need a head for. The number stamped onto the outside of the head is 318392. I went to a boatyard and found a head that looks the same on the outside, same diameter combustion chamber, but the combustion chamber padding looks slightly different and the...
View older results
Top