Search results

  1. B

    Question regarding "LUGGING" an engine

    If the older 85, 115, 135 & 140 hp OMC outboards where the same, except for carbs & exhust, then wouldn't running the lower hp engines at a lower WOT rpm be the same as running the higher HP engines at reduced throttle???<br />ie: My 115 running @ 5000rpm at WOT being virtually the same as a...
  2. B

    Trim/Tilt Sending Unit>???

    I am in need of a sending unit for the trim/tilt gauge on a 1978 115HP Johnson. I went to the local dealer,expecting to pay about $30 bucks for what amounts to a potentiometer encased in thermoplastic (way over priced at $30 in my opinion).>>>I almost fell over when the counterman said he would...
  3. B

    Stiletto Props???

    OK, Its now time to purchase a new prop for my 1978, 115HP Johnson. I have had the STILETTO StainlessSteel props recommended, and they look like a great prop for my needs. The only problem is, this site doesn't sell them. <br />Can someone recommend a dealer where I can get a good price??? or...
  4. B

    OMC- ALUM. to STILLETO???

    Hi, I have raised the engine hight on my 18ft,1971 modified vee hull and now my 1978 Johnson 115hp is turning 5500rpm. I am running a used (slightly abused) 14x17 OMC aluminum prop and would like to step up to a Stilleto. Will a 13.25x19 S.S. Stilleto give me abt the same rpm as the 14x17??? <br...
  5. B

    Outboard Engine cowl?

    How important is the seal between the engine & cowl?? I have a 115HP johnson (1978) and notice a gap(aprox 1/8"wide & 1"long) in areas around the corners & the backside of the cowling. Are new gaskets avalable???<br />Thanks<br />Jim
  6. B

    Did I get ripped-off in repair???

    I payed thru the nose ($680.00) at a Long Island NY Johnson dealer to have my engine tuned and carbs rebuilt.<br /> It is a 1978 115HP johnson, that has been sitting for the last 20 or so years. I fired it up on muffs after injecting some Mystery oil into the cylinders and it ran well. <br />...
  7. B

    Oil residue from powerhead???

    I have been doing some testing of props and engine positions to increase my WOT RPM>>>I'm now running at abt 5400rpm as suggested, but I'm now noticing an oil residue running down from under the front of the powerhead. Some of this looks like its spent fuel & oil (dark & thick) and some looks as...
  8. B

    Foam in Vintage glass boats???

    When did the use of floatation foam in the manufacturing of fiberglass boats start??? And was it used by all Manufacturers??? <br />I am asking because I inherated my dads 1971 Westwind (Aquasport) 18ft boat, and am wondering if it has foam or not??? <br />I think the flooring is getting a bit...
  9. B

    OMC or AFTERMARKET Prop????

    I need a new prop for my 18ft Deep Modified Vee with Johnson 115 (fresh 1978 model>>PLEASE see my post "NEWGUY PROP???") The engine ORIGINALLY had a 13x19 and ran well>>>but that was the old "elephant ear" style OMC with no cupping>>now that prop needs a new hub, and I don't think its worth the...
  10. B

    NewGuy PROP???

    I have just reconditioned my old 1971 18ft Deep Modified Vee>>>with a Johnson 115 (1978). The original prop was a 13x19, but it just spun on the hub when I put the power to it. OMC dealer sold me a new Alum. 14x19>>( he said the new design prop needs wider diameter). Well the boat does have a...
View older results
Top