Search results

  1. K

    200 black max small oil hose

    1988 200 Oil injected (long since removed) carb motor There are a number of small oil lines going all over this motor; from the cylinders to the Crank Case and so forth. There is one in particular that is right beside the shifter arm. This particular hose barb has been broken off, presumably by...
  2. K

    Separating powerhead

    I have a 200hp 1988 V6 merc Black Max. Number 2 cyl is is moderatly damaged and the piston is toast. Serial number ob242097 Unless I am misinterperting my research, this motor has chrome cylinders. I hooked the cherry picker up to the lift eye and undid all the fasteners and she won't budge!! I...
  3. K

    Need help with head gasket!!

    I bought a set of head gaskets from the local boat parts dealer and he sold me the wrong ones. Can someone please give me a part number to take to him so I can get the right ones without too much drama? This is a 200hp 1988 black max. Serial number ob242097. I ordered a manual, but it won't be...
  4. K

    Overheat black max 200

    Greetings, I have a 1988 Black max 200hp that is overheating. I have a good stream out of the tell tale, but the heads are really hot to the touch. I have no idea if the overheat sensors are working, but I am guessing not, and I don't really know where to start troubleshooting them. Anyway, I...
  5. K

    Mercury v6 lower unit

    I have a 1988 200hp black max with a bad L/U. I have shimmed gearcases in school (MMI) but that was 2 years ago. I haven't managed to get it apart yet, and am considering cutting the bearing carrier out. Do you have to pull the shift shaft to get the bearing carrier out? Thanks!! Rob
  6. K

    Gearcase tools

    Can someone tell me where I can buy Gearcase tools? Any help would be appreciated. Thank you for your time!! Rob
  7. K

    200hp black max

    I just got a 1988 200hp black max. Water is comming out the tell tale just fine while on the hose, but the heads are a little warm. When I ran it this past weekend It got really hot and stopped comming out the tell tale so good. I put her on the trailer and took her home. When she had cooled...
  8. K

    Honda gearcase

    can someone please tell me where I can buy Honda gearcase tools? or any gearcase tools for that matter? Website? Dealer? Any help would be appreciated! Rob
  9. K

    1988 200 Black Max

    I just bought a boat with a 1988 200hp Black max without test driving it.....big mistake!! Turns out the gearcase is toast. The propshaft is twisted, and there is metal in the oil and it dosen't like to go into foward without grinding. Is there a reasonably priced solution out there? Is there...
  10. K

    1988 Black max 200hp

    Greetings, I am new to this forum and I have a couple of questions. I have a 200hp 1988 Black max. First off, the trim and tilt bleads down slowly and I assume this is a faulty check valve. I have removed a handfull of T&T assemblies but have never torn one down. Does anyone have any diagrams...
View older results
Top