Search results

  1. K

    1954 cd11 johnson wont run

    I mean, how would i go about inspecting that, because when i tried to remove my flywheel, it was stuck tight, even after hammering with a block of wood and a hammer
  2. K

    1954 cd11 johnson wont run

    I only cleaned the carb, i did not remove any welsh plugs or replace anything
  3. K

    1954 cd11 johnson wont run

    Yes fuel flows out
  4. K

    1954 cd11 johnson wont run

    Sorry, im not too familiar with these motors
  5. K

    1954 cd11 johnson wont run

    What do you mean by crankcase compression
  6. K

    1954 cd11 johnson wont run

    Compression was 90, give or take 2 each way. Between the two cylinders. I just got the motor and im picking uo the last idiots pieces
  7. K

    1954 cd11 johnson wont run

    There is no filter in the glass bowl
  8. K

    1954 cd11 johnson wont run

    There is a glass bowl underneath which i can see fill up with gas when priming. Both fuel hoses were replaced and i believe were hooked uo correct The left side of yhe fitting to the carb, right side to the block
  9. K

    1954 cd11 johnson wont run

    Spark jumps max like 3/8. There is no filter anywhere i can find. What abiut the preasure tank?
  10. K

    1954 cd11 johnson wont run

    I did not replace myself, but im not worried abijt spark as it has a strong white spark
  11. K

    1954 cd11 johnson wont run

    Tried it with no difference
  12. K

    1954 cd11 johnson wont run

    I also changed the fuel lines and ensured fuel was moving from the tank. Noted, the tank does leak around the gasket, but the primer feels firm
  13. K

    1954 cd11 johnson wont run

    I have went and checked points, aswell as seeing coils were replaced, i have strong spark, but i noticed, it will bark on starting fluid, but not stay running. It has 90 psi on both cylinders, and i can see the bowl of the carb is full. I cleaned the carb, but did not rebuild, and i notice, when...
  14. K

    1970 60 hp evinrude no spark

    And, to clarify, I put the amplifier on and it had spark, and came back to it a week later and now it doesnt
  15. K

    1970 60 hp evinrude no spark

    Unfortunately, no dice for that
  16. K

    1970 60 hp evinrude no spark

    Hey guys, I have a 1970 60 hp evinrude with no spark, I have replaced the coil and the amplifier and cleaned and set the points, what could cause the no spark, the model Is 60073B, also the clipper circuit is removed if that makes a difference
  17. K

    1970 60 hp evinrude distributor cap ferrules

    Yeah, everybody on ebay wanted like 7 per and the dealer was 3 per and free shipping
  18. K

    1970 60 hp evinrude distributor cap ferrules

    Ok, my local dealer had a ton of them
  19. K

    1970 60 hp evinrude distributor cap ferrules

    That would work perfectly, thank you
  20. K

    1970 60 hp evinrude distributor cap ferrules

    Hi, I was wondering where I could get the ferrules for a distributor cap for a 1970 60 hp evinrude as I tried to crimp the ferrules on the wires and they were brittle and they cracked and broke
Top