Search results

  1. L

    will spray paint harm the fibreglass

    will using ordinary spray paint on the inside of a fibreglass boat,harm the fibreglass
  2. L

    a green horn question-ASAP

    i want to check for a spun hub<br />i was toll to mark a line from the center of the hub all the way out to the metal part of the prop.<br />to see if it slips. does this mean to mark on the inside of the propeller on the propeller nut and along the inside of the propeller.also the blades are a...
  3. L

    spun hup

    how do you check for this on a 1974 johnson 70hp
  4. L

    trimming won't stay up

    14 foot 1974 trihull with 1974 johnson 70hp<br />i have trouble getting the front end down so i have been toll to trim the motor up, when i do this and give it gas soon the motor drops back down. in the manual it says at 1500rpm a relief valve will automatically open causing the outboard to...
  5. L

    trimming won't stay up

    14 foot 1974 trihull with 1974 johnson 70hp<br />i have trouble getting the front end down so i have been toll to trim the motor up, when i do this and give it gas soon the motor drops back down. in the manual it says at 1500rpm a relief valve will automatically open causing the outboard to...
  6. L

    leaking gas at carb?

    while the motor is running i have the air silencer cover off and no gas is leaking from the 3 carbs it idles well. when i shut the engine off a little gas leaks from each carb out the front.new spark plugs,compression is 125 for all 3. is this normal,i am having trouble to get full...
  7. L

    what does trim do

    if i trim the motor up would this make the back end of the boat go down and the front end go up or the other way around. how would i check for a spun hup
  8. L

    LOW REVS

    1974 TRIHULL WITH 1974 JOHNSON 70HP<br />RUNS GOOD .EXCEPT WHEN YOU GIVE IT FULL THROTTLE,THE REVS ONLY GO SO HIGH,AND THE BACK OF THE BOAT STAYS DOWN,AND IT SOUNDS LIKE THE MOTOR IS BOGGING DOWN ,FRONT END WAY UP.COMPRESSION IS ALL AROUND 125. EVERY TIME I START THE BOAT I HAVE TO USE THE CHOKE...
  9. L

    were should the johnson pee from(1 more?)

    i have a 1974 johnson stinger2(70hp) it pees water from quite a few places down low. but i know on alot of outboards you can be on the lake and you can see it peeing out the back up high so it is easy to tell the water flow is good. is this normal for this engine. or should it be peeing up high...
  10. L

    is it time for rebuilding

    i have a johnson stinger2 70hp<br />i took my compression today<br />120<br />100<br />90<br />should i be looking at getting the motor rebuild<br />also is there a avereage cost to get this rebuild<br />i live in canada<br />thank you
  11. L

    what year is my 70hp

    what year would my 70hp johnson stinger2 motor be<br />serial#c6083
  12. L

    1974 johnson stinger2 trouble( 70hp)

    this motor is on a 1974 fiberglass trihull.<br />if you start slow or punch it down the front end goes up and the motor will not rev up, it sounds like the motor is dragging. sometimes if you hold it wide open long enough the revs will get there and the front end will go down. i tried triming...
View older results
Top