Search results

  1. A

    yamaha 1990 130hp not enough fuel

    hey guys i have a 1990 L130ETXD the motor sat for about 2 years while i restored the boat now the boat is done and i need to get the motor top notch i have it runing but not very well it will idle but sounds pretty bad i took it out and tried to get on a plane and it will not go over about 2800...
  2. A

    1996 evinrude 15hp cant figure it out!!

    hi guys i have been working on this motor for weeks i am convinced it has to be something small and i am overlooking it when i got the motor it was geting water in the botom cylinder i have solved that problem and it still will not idle i have to keep reving the motor i have also rebuilt the...
  3. A

    metal in fuel rail

    i have a suzuki df90 2005 it ran very rough would not get on a plain i took the fuel rail off and cleaned it out and the material i got out was some sort of metal i checked it with a magnet where would this come from??
  4. A

    df90 fuel problem

    hi guys i am working on a friends boat with a df90 on it it is starving for fuel i have cleaned the filter inside the vst on the bottom of the electronic fuel pump and replaced the canaster filter on top of the vst i have the fuel rail off and it was full of junk i balive there is a screen on...
  5. A

    No power

    I have a DF90 SERIAL NUMBER 09001F-680573 i can not get my boat on a plain the motor runs very rough and will not get past 2500 2800 rpm i had alot of water in my tank and i drained it and refilled and thought that would solve my problem but it is still there any help is greatly apreciated
  6. A

    motor will not idle

    i have a 1996 15 hp evinrude the motor ran like crap when i got it and it was geting water in the bottom cylinder i replaced the base gasket and ruber gromets on exhaust and water coper tubes i have no more water in the cylinder but the mottor still runs like junk and will not idle i have...
  7. A

    1996 15hp evinrude PLEASE HELP

    hi guys i have just purchased a 96 evinrude 15hp i got a really really good deal on it but now i am not thinking so i cant get the darn thing to idle at all the carb has been rebuilt and cleand and cleaned and cleaned the motor sounds great at higher rpm but at low rpm sounds almost as it is...
  8. A

    1996 evinrude idle problem

    hi guys i have just purchased a 1996 evinruide 15hp i am rebuilding the carb and im confused there is a screw in the back of the carb that has a flat end and it was screwed all the way in there is also a screw on the left side with a spring and a needle tip witch i asume is the mixture screw im...
  9. A

    wholesale marine parts

    Hi guys i took my mobile marine service to the next level and started a LLC now that i have my tax I.D. number i was wondering if anyone knew a good wholesale marine website or company?
  10. A

    water in cylinders

    hey guys i have a little evinrude 15hp tiller i put a new power head on my mid section and it runs but very poor when i checked the plugs they have water on them were are the few places water could get into the cylinders?
  11. A

    submerged motor

    hey guys i have a 15 johnson tiller over the weekend it feel off and into the saltwater any ideas of what i need to do or is it even worth messing with?
  12. A

    yamaha 90 hp stall problem

    hey guys i am working on a 2003 yam 90 hp it did not run when i got it the fuel had lots of water cleaned fuel tank and carbs got it runing but it only runs for about a min and then stals out checked fuel pump looks great does anyone have any ideas??????
  13. A

    yamaha vmax

    hi i have what i think is a 1999 or 2000 yamaha vmax 175 does anyone have any idea what the model number might be or any idea at all the number are all wore off of it also when you are adjusting the carbs turning the pilot screw out make the mixture more lean and in make it more rich...
  14. A

    1989 johnson 15 hp

    i have a 15 hp and there is no kill switch so the guy that had it has it to where you throtle all the way down and it shuts of to start it i have to have the throtle about half way this is not right could he have moved the points under the fly wheel to make this do this?
  15. A

    yamaha 300 hpdi

    i have a 2004 yamaha 300 hpdi i went to the keys for mini season and filled my boat up at a marina several times there when i got back home i have been having problems with my motor if i try to get up and go very quickly the motor just falls on its face i can get up on a plain if i really ease...
  16. A

    115 hp fuel pump

    i have a yamaha 115 2002 fourstroke when i turn the key the fuel pump does not come on does this mean that the fuel pump is just bad or is there other thing that could have gone wrong? also is there a vst on these motors and how much does one of the fuel pumps cost?
  17. A

    trim sendors

    i have just replaced both of my trim sendors on my yamaha four stroke 115hp and the are not callibrated how do i call. them on the gauges????????
  18. A

    warning horn

    i have a four stroke 115 when i trim it up there is a warning horn it is not constent horn it is on off on off on off im not sure wht its trying to tell me?????
  19. A

    battery instal

    i am instaling 3 batteries in my 23 bluewater with twin motors it has 2 battery switches and i am not sure how to wire it all in anyone have any ideas?
  20. A

    I/O fluid change

    i have a straight 4 mercruiser with a alpha one drive with the fluid monitering tank on it what is the correct method to change the lower unit oil?
Top