Search results

  1. B

    What comes first fuel filter/water seperator or the primer bulb?

    I have a 1985 140 hp Johnson and I would like to know whether the primer bulb is before the fuel filter/water seperator or after the filter. Does it make a difference? Thanks
  2. B

    T-stat for a DT30hp Suzuki

    Can a t-stat for my 1982 30hp Suzuki be purchased from another source other than a Suzuki dealer?
  3. B

    Power cable and/or transducer cable for Humminbird LCR 4X6

    I just got a Humminbird LCR4X6 without any cables does anyone have any for sale?
  4. B

    A T-stat question on 1985 140hp Johnson

    I had the head replaced on the starboard side due to a poorly installed helicoil that was done prior to me purchasing this motor. I noticed that the starboard side ran much cooler than the port side.Getting ready to put the boat in the water I felt I should change the thermostats. I found the...
  5. B

    Johnson 9.9 hp gas problem

    This 1985 Johnson starts and idles fine but under load it breaks up. I changed the fuel pump, carb., tank, hoses, bulb and connectors. The only hose not checked was the hose from the motor connection to the fuel pump. Any other thoughts?<br />Thank you
  6. B

    What is the year of this Tanaka Kogyo?

    This Tanaka is air cooled and has the gas tank on the top of the motor. The only number I found is B 042184. Also, are parts available?
  7. B

    Guidance on 15 hp Evinrude E15BLCNC

    I removed the powerhead from the housing because it wasn't peeing from the pee hole and was getting very hot and I tried all the recommended cures too no avail ie: new water pump, back flush through the pee hole and a garden hose into the copper tube. I found that the grommet at the end of the...
  8. B

    This is for 2K BOAT

    I was reading some previous posts and I came across where you were doing something with a 25" drive shaft for a Johnson. I'm looking for a used 25" shaft for a 1985 Johnson 140hp. Do you have one? Dude31142@aol.com Thank you
  9. B

    Switching lower units on 15hp Evinrudes

    I have a 15hp Evinrude long shaft E15BLCNC and a 15hp Evinrude E15RCOB as you can see the second motor is not a long shaft. I have determined that the upper grommet on the long shaft motor has calasped and is preventing cooling water to circulate through the motor. I have done all usual steps to...
  10. B

    What do I do if I'm caught in an unexpected storm.

    This may not be the right thread for this forum but most of the participants use this location. I attended a Power Squadron class and they didn't talk about "what to do if you are caught in a storm". Most of my fishing activities will be close to shore (1 to 10 miles) summers only . Some...
  11. B

    What do I do if I'm caught in an unexpected storm.

    This may not be the right thread for this forum but most of the participants use this location. I attended a Power Squadron class and they didn't talk about "what to do if you are caught in a storm". Most of my fishing activities will be close to shore (1 to 10 miles) summers only . Some...
  12. B

    Used 25" xtra long drive shaft for "85 Johnson

    I'm in need of 25" xtra long drive shaft for a 1985 Johnson 140 hp TXCO. Joe R tried to help but he didn't have anything. Ebay has nothing. I would much rather get one from this forum then elsewhere. Email Dude31142@aol.com
  13. B

    1985 140 hp Johnson Model TXCO Driveshaft Questions

    Presently I have a re-machined drive shaft in my 140 Johnson but I'm affraid it may not last. I can get two 120hp Johnson long shafts and cannibalize each of the shafts and make one extra long shaft. Can somebody tell me the total length of the extra long shaft measuring from the threaded end of...
  14. B

    Hey northend,

    I have a 140hp 1985 and I have nothing but good things to say. I would ask others in this forum about the VRO. As to whether you shoud trust the VRO or mix your own oil with the gas.
  15. B

    SeaNav 12 Hand held GPS

    I was given a SeaNav 12 GPS recently without a operators manual. I tried the internet without any success. Does anyone have a manual or can direct me to where I can obtain one.
  16. B

    Joe Reeves

    [No message]
  17. B

    Drive Shaft for a 140hp Johnson 25" length

    I am in need of a 140hp Johnson drive shaft it is a long shaft 25". With the shaft out of the lower unit it measures approximately 36". I have a 20' shaft for a trade. The model # is J140TXCO
  18. B

    No water stream coming from the telltail opening

    I have a 1984 Evinrude 9.9 hp outboard motor and there is no stream of water coming out the back port side of the engine.<br />I installed a new water pump with no new results.<br />I found that the thermostat was removed by the prior owner. I dropped the lower unit again and attached a garden...
View older results
Top