Search results

  1. S

    1984 force 125 Leaking tilt and trim?

    Ok so after some research there was a small hole in one part that’s been fixed I redid all the seals and now the motor will definitely hold where it’s at but the problem is now I put that sae 30 non detergent and it seems thick when I take the lines off the motor is definitely moving it but the...
  2. S

    1984 force 125 Leaking tilt and trim?

    Normally it holds itself up until I lower it down then it starts leaking again
  3. S

    1984 force 125 Leaking tilt and trim?

    I will try this when I get home and see what fixes it I may have somewhere letting a tad bit of air in but I will preform the leakdown test as well
  4. S

    1984 force 125 Leaking tilt and trim?

    Honestly the video I watched just said go up and down three times then let the air out and do that about 5 times
  5. S

    1984 force 125 Leaking tilt and trim?

    Also should I put loc tight or thread sealer on the hydraulic flare nuts
  6. S

    1984 force 125 Leaking tilt and trim?

    Hey one last thing how much air do you have to bleed out of tilt and trim, it seems it will stay up then when I go down and up again it starts leaking down again then when I bleed air it goes away
  7. S

    1984 force 125 Leaking tilt and trim?

    Only a couple years inches nothing major not even near the exhaust boot
  8. S

    1984 force 125 Leaking tilt and trim?

    But even when I was running it last Saturday noticed no issues from the water so I’m gonna let it ride for now!
  9. S

    1984 force 125 Leaking tilt and trim?

    I will try to see exactly where it comes from next time I’ll lower it really slow and see what I can’t find thanks for all the help guys! I have just about solved all my issues from when I first bought the boat till now!
  10. S

    1984 force 125 Leaking tilt and trim?

    I believe I fixed the tilt and trim now I just went outside and it has not moved at all I tightened everything extremely tight and I believe that did it I think the flared end wasn’t in the right position so it didn’t get a proper seal
  11. S

    1984 force 125 Leaking tilt and trim?

    @topgun3690 Boot was definitely bad after tightening the heck out of tilt and trim it seems to be slowing the leak to extremely slow where it takes a hour to drain a little bit. Still trying to figure out water issue tho
  12. S

    1984 force 125 Leaking tilt and trim?

    Yeah I 100% understand I was just confused when I lower it water comes in I know when I pour a bottle of water in I can see where it leaks out right above the shock absorber
  13. S

    1984 force 125 Leaking tilt and trim?

    Would that cause any serious issues with water in there?
  14. S

    1984 force 125 Leaking tilt and trim?

    I believe I mis spoken I think it’s called the leg cover that’s getting water in it I believe number 57 on your picture @topgun3690
  15. S

    1984 force 125 Leaking tilt and trim?

    Only does it when I lower the motor into the water btw not with a hose running @topgun3690
  16. S

    1984 force 125 Leaking tilt and trim?

    The exhaust boot is deff bad just looked but it’s only like 3 inches of water it immediately rushes in
  17. S

    1984 force 125 Leaking tilt and trim?

    Ok I will check thank you! It’s raining right now I will update!
  18. S

    1984 force 125 Leaking tilt and trim?

    @topgun3690 I will check that I know where part 61 is on that diagram water leaks from around that area when tilting the motor up. I poured a bottle of water in there and watched it drain . I imagen if waters getting out waters coming in is some water sappouse to get in?
  19. S

    1984 force 125 Leaking tilt and trim?

    @topgun3690 sorry to bother again a couple last questions When I put the boat in the water I get water like in the bottom of the motor housing I can see it when I take the cover off and drains at a spot close to the boat hull Last thing is when I put the cover on the idle rpm’s drop a lot I...
  20. S

    1984 force 125 Leaking tilt and trim?

    Ok I will try cleaning first see what happens
Top