Search results

  1. BonairII

    18' 1969 Offshore V restoration

    Re: 18' 1969 Offshore V restoration I would mock up diff seat heights and see what you like BEFORE ordering seats. I doubt that you NEED a jack plate. I'm guessing that you'll want to upgrade to a larger motor at some point....so I wouldn't bother with a plate. CMC power trim will work for...
  2. BonairII

    18' 1969 Offshore V restoration

    Re: 18' 1969 Offshore V restoration Operating range on my 1978 75hp(pretty much the same as the 70hp) is 5200-5800. I would doubt that the 70hp is only 5k....but I def could be wrong. Your motor will probably run best when it's even(or 1" above the keel line). My 75hp is about 2" or so...
  3. BonairII

    18' 1969 Offshore V restoration

    Re: 18' 1969 Offshore V restoration Congrats on your splash! Boat looks great. 5200 rpm might be a tad low for your motor. I'm guessing that you might be a bit over-propped. What pitch is your current prop?
  4. BonairII

    18' 1969 Offshore V restoration

    Re: 18' 1969 Offshore V restoration Did u have to buy a separate adapter to power them? I want to install LEDs for some night fishing....so any advice would be great. Your boat is looking great btw. I saw it when it was first listed on CL....and was seriously considering making the...
  5. BonairII

    18' 1969 Offshore V restoration

    Re: 18' 1969 Offshore V restoration Maybe I missed it....but where did you get those LEDs? Cost?
  6. BonairII

    Is my charging system working correctly?

    I'm using an Everstart marine battery as my starting battery. It's a new battery. EverStart 27DC-6 Marine Battery: Automotive : Walmart.com It's only used for starting the motor...everything else(bilge pumps, lights etc) are run off my trolling motor battery. During a typical day on the...
  7. BonairII

    Will '79 55hp lower unit fit 1979 70hp motor?

    Found a 1979 Johnson 55hp outboard for $100 bucks....will the lower unit work on a 1979 70hp?
  8. BonairII

    Do I need a new wiring harness for my CMC tilt/trim?

    The relays on my wiring harness are just a tad loose in the pigtail....and ocasionally losing electrical connection(have to wiggle relay to make contact again). Can I use dielectric grease(or whatever) to make better electrical connection within the pigtail? Can I splice in a new...
  9. BonairII

    Worth buying a 1994 Johnson 90hp with low compression?

    Got a call from a guy selling a 1994 Johnson 90hp (I had a "90hp wanted ad on CL a coulole weeks ago). Says the motor has low compression on 2 cyls(around 85psi)...and 120 psi on the other 2 cyls. I'm hoping maybe a bad head gasket. Motor has power trim and LU was completely rebuilt last...
  10. BonairII

    Best adhesive for marine carpet?

    I was all ready to use Roberts 6700 for my marine carpet install....and then I happened upon this: Best deck waterproofing before gluing carpet?? - TinBoats.net I was considering contact cement, but I think it's going to be a nightmare to use since it immediately bonds(with no way to reposition...
  11. BonairII

    Where to find a telltale fitting for my 75hp Evinrude?

    I currently use this fitting with plastic hose(ice maker hose, I think) as my telltale. http://www.homedepot.com/p/Watts-1-4-in-x-1-8-in-Brass-Compression-x-MIP-Adapter-A-22/100638219#.UVy4oucmmSN The hose has melted on me before when water got too hot(water inlets were partially clogged with...
  12. BonairII

    Can I run my motor with the leg NOT locked down to power trim plate?

    Just installed CMC trim/tilt on my 1977 Evinrude 75hp. Previous to the CMC, I always ran my motor with the leg in the unlocked position (in case I hit an underwater obstruction). The only disadvantage of it being unlocked...is that the leg tries to climb out of the water if I run reverse...
  13. BonairII

    Need help with possible 1971 Mercury 40hp purchase

    Going to look at a 1971 Mercury 40hp. Seller says he bought boat/motor together. He started motor and it ran fine, now it won't start. I don't have much more detail than that yet....but I'm hoping he's a dope and it's something simple causing it NOT to run. What are good compression numbers...
  14. BonairII

    Need help with 1983 OMC tilt/trim

    I think Ive found an OEM TNT for the 1979 Stinger I'm picking up this weekend. I'm stealing the CMC from the Stinger for my Evinrude...and am going to put the OEM tnt in question on the Stinger. I haven't seen the tnt yet, but seller says it works very well. He says the unit is complete up...
  15. BonairII

    How to setup my roller/bunk trailer?

    I'm about to swap trailers and put my boat on a roller/bunk trailer....and need advice on where to locate the bunks. This is the trailer(the boat shown is being sold) that I'm going to put my boat on This is my boat on its current trailer. This trailer being sold Where's the best place to...
  16. BonairII

    Should I buy this damaged Sea Nymph? (I bought it...and now sold it!)

    Drove an hour to take a look at a 16.5' Sea Nymph today. It's almost identical to my Starcraft SS. Problem is that the boat has 4 holes(about 2" in diameter) drilled into the hull on the starboard side...2 of which are below the waterline.. The original owner(not the seller) built some...
  17. BonairII

    Anyone used Sherwin Williams macropoxy 646?

    I've been trying to decide whether to paint or carpet my SS. I like the looks of carpet, but don't want to deal with stains and/or the carpet retaining water. I've done some reading on Durabak and many other non-slip coatings and am not loving the cost of these products. I came across the SW...
  18. BonairII

    Rule Bilge Pumps....who sells them the cheapest?

    I'm going to order a couple Rule bilge pumps later this week. (Rule 500gph automatic and a 500gph manual) I'm constantly checking my bilge while on the water.....just cause I'm paranoid, and I like the idea of the pump cycling at regular intervals rather than using a float switch. The manual...
  19. BonairII

    Inner tubes instead of floatation foam for my Starcraft SS ?

    My Starcraft SS currently has no floatation foam(except for about 35 pool noodles) I only run the boat in a somewhat small lake, but it's time to make some decisions on what to use to keep the boat afloat in the event of a leak, swamping, etc. After reading thread after thread on pour-in foam...
  20. BonairII

    1978 70hp Johnson won't shut off with the key

    Just replaced the PP and got the motor running somewhat well. I went to turn off the motor and it doesn't shut down with the key....had to choke it to shut it down. This motor is new to me so I don't know if this is a new issue or was a problem before I bought it. Been doing some reading here...
Top