Search results

  1. T

    7.5 evinrude (1982) 2 stroke) inperller?

    took the boat out to check things out the other day, i noticed that the water does **** out but not in a steady fast stream , it's was alittle on the interupted side ....comes out then stops for about 2 seconds and then comes out, could this be a water impeller(water pump ?). and if so...
  2. T

    spark plug question

    i have a 1982 7.5 h.p 2 stroke, model # E8RCNR don't know what the R stands for. i bought new plugs but when i matched them up to the repair manual they are different numbers , the plugs i have in there are champion QL77JC4 and the manual calls for L7734, Iis there any differece between...
  3. T

    should i change the plugs

    i fogged my motor over the winter and i was told that when i start the motor with those plugs and then after everythings burns off i should change the old plugs with two new plugs ...... is that true or can i use the same old two? cleaning them and gaping them .
  4. T

    adding 80-90 to my lower end

    i have a 1982 7.5 h.p evinrude, i just changed the lube in it i let it settle and it's not up to the vent plug. i used a valvoline 80-90 marine product, i have some lube in another bottle johnson 80-90 can i top it off with that stuff ? i know you not saposta mix but this seems...
  5. T

    outboard size vs. weight

    i will be looking for a 2 stroke (possible a 4) 9.9 or a 15 h.p is there any weight difference between the both? and the older i go on the motors will they be heavier? aposed to the newer one 1990 and up, i do want to stay with a newer one mainly with a shut off landyard and lighter on...
  6. T

    proformance of an older motor

    i have a 14' aluminum with a 1982 2 stroke 7.5 evirude, i did add a removable deck and floors totalling about an extra 50 or so lbs. with me only the motor does ok but with one more it plows . i would like to get a 9.9 or a 15 h.p (max for motor) 2 stroke or is a 4 stroke better? my...
  7. T

    shoot thru transducers

    is there any kind of shoot thru transducers that go thru aluminum, and or is there other t/ducers that go on your o/b motor or is that the one i'm thinking of goes on your trolling motor.
  8. T

    bracket to adapt. transon to bow trolling motor

    is there a bracket on the market to use a transom troller on the bow.
  9. T

    bow troller seems not to pull boat

    i bought this used bow troller and it does work , it's the foot pedel type that turns the motor, i tryed it yesterday to get used to it and for the life of me i couldn't get it to go stright, it almost seems like it won't pull the boat. it's a motorguide 41lb., now when i made my...
  10. T

    boat project

    well just finished my project, for some reason couldn't post it in the complete project tread. i put in some removable floors. then added a casting deck. then added a bow trolling deck. and went to cabelas and bought a pedestal and chairs also i bought this used bow troller ,well...
  11. T

    replacing the new wood on transom

    i just bought a new 14' seanymph and the plywood that comes with the boat is pretty soft ,some wheres around 5+ ply, i have a small motor and sometimes use a transom troller when tightening it just indent the wood pretty good. other than getting some expensive wood would a nice hard oak work?
  12. T

    motor guide wiring

    what i have is a plug that is hard wired to the foot pedel which goes into the adapter now i need somthing to go from the adapter to the batt. to make it run, who sells them ?
  13. T

    1982 7.5 evinrude( starting in neutral or foward pos.)

    figure i'd start a new tread..... like i said in my other tread i took the motor out for a spin and it did well but at one point i shut it off and when i tryed to start it it wouldn't start , i thought it was in neutral(still not stating) but it seemed to start in the forward position, is...
  14. T

    1982 eninrude 7.5

    just picked up this motor for & 400. thought it was a good deal. the guy who had it was running 50:1 on the oil and he said it still smoked, what am i to use for this year?
  15. T

    installing a bow troller

    i already have a casting deck and now gonna make a box on that to put my troller. question? does the box have to be even with the rail of boat so the troller goes up , out and down correctly or can there be a step from box to rail?
  16. T

    of all the 1 cyl. 4 strokes

    of all the 1 cyl. 4 strokes which one would give you the least amount of problem, as i been hearing from alot of complaints.
  17. T

    all 2 strokes motors

    are all 2 stroke outboard motors 2 cylinder?
  18. T

    johnson 6 h.p 4 stroke

    i have a deposit on a merc. 8 , 4s but thinking do i need all that , then thinking about the 6 4s merc but there to much vibration and doesn't idle like it should. heard that from past stories. kinda nothing but trouble. the place where i'm buying has a 2005 johnson 6 h.p 4 stroke now do...
  19. T

    turning transom troller into a bow troller

    i have this transom troller (minkota 55lb.) and want to turn the handle or motor 180 deg. so i can use it on my left port bow or right depending . can someone walk my thru this at least i'll know how do it incase i want to use it on a transom again. thanks
  20. T

    mercury 6 or 8 h.p

    trying to make my mind up between a 6 4s or an 8 4s merc. i know there are some restrictions on lakes for h.p or m.p.h and theres my opinion on a 2 cylinder apose to a 1 cylinder i rather have a 2 cyl. cus of less vibration and a smoother running motor but on the other hand there all those...
Top