Search results

  1. tpenfield

    Heavy Lifting - of 33 foot boat for bottom painting

    Hi Folks - This weekend I was sanding the hull of my 'new-to-me' boat (Formula 33 foot) in order to get ready for painting of a Barrier coat and then an Anti-fouling paint. The boat is currently on blocks and stands, the thing weighs approximately 9,000 lbs . . . So, there are 2 areas, fore...
  2. tpenfield

    I Found a Crack in My Seat

    . . . boat seat that is . . . As I was cleaning and bleaching the cockpit and compartments yesterday, I looked under the rear seat and noticed a crack in the fiberglass base of one of the rear seats. This particular seat is a cantilever base and is part of the rear "U" shape seating. Here is...
  3. tpenfield

    Relocated the Bilge Pump

    Since I have been going through my 'new-to-me' boat and getting everything ready for launching in May, I decided to relocate the bilge pump. The thing about bilge pumps is that they are typically located at the furthest point from where the water is . . . which in a power boat is near the...
  4. tpenfield

    New Exhaust Shutters

    Well, i found the backing plates for the exhaust shutters in the exhaust ducts of one of the outdrives when I took them off last fall. So, I am assuming that the shutters are vaporized and should be replaced . . . probably both engines. It seems that the Mercruiser part is 807166A1 (replaced...
  5. tpenfield

    D-I-Y Fender Covers

    I wanted to get some fender covers for the boat. I saw some at West Marine for $30 each, and they were not so great. So, the Admiral found some throw-blankets at a discount store that were similar to the teal accent color of the boat. . . today, she made the covers . . . I think that they...
  6. tpenfield

    Carnival Cruise does it again

    New Carnival nightmare: Passengers being flown home from troubled cruise | Fox News this time they are flying people home . .
  7. tpenfield

    Happy Pi Day

    :D Almost forgot that today was "Pi" day . . . :rolleyes:
  8. tpenfield

    Watch out for those cabin floor lighting fixtures . . .

    I have been doing quite a bit of electrical work on my boat recently. Yesterday I was going through the cabin, checking the lights, looking in various nooks and crannies. then all of a sudden, the lights in the cabin go into brown-out, then the circuit breaker trips. . . . I smell something...
  9. tpenfield

    Smoke and CO2 Detector Installation

    The pre-purchase survey on my boat recommended the installation of both smoke and CO2 detectors in the cabin. I guess the smoke detector is 'required' and the CO2 detector is 'recommended'. I had ordered the detectors a while ago, so today was 'installation day' . . . Here are some pictures of...
  10. tpenfield

    VHF Radio Installation w/ Pics

    After a few weekends of traveling around the country, etc, I finally got a chance to work on my boat :thumb: So, I decided to install a VHF radio, since the boat did not have one previously. Here are a few pictures of the day . . . I have noticed that other F-330's typically have have the VHF...
  11. tpenfield

    New Boat Dealer Cost . . .

    Just found this web site . . . Marine | See Dealer Cost Looks to have dealer invoice prices for new boats, etc. So, I checked out a Formula 310 . . . MSRP $227,000 . . . Dealer cost $142,000 (62% of MSRP :eek: ). When I was at the New England Boat Show this week, I noticed that the MSRP...
  12. tpenfield

    New England Boat Show - Boston Exhibition Center Feb 16-24

    The New England Boat show starts this weekend and runs through next weekend. I always try to get there to see what is new and exciting in the boat line-up. Who else from the New England area plans on going ??? I'm going to be out of town both weekends, so it looks like I will have to go during...
  13. tpenfield

    Punxsutawney Phil

    No shadow today . . . Might as well start getting the boat ready for launching . . . :D
  14. tpenfield

    Jeopardy Game Show 'Champion' Computer Heads off to College

    Looks like a even computer can now go to college, as long as it is smart enough . . . :eek: Jeopardy Super Computer WATSON Is Going To College At RPI [AUDIO] | Q 103 - Albany's #1 Rock Station
  15. tpenfield

    Spark Plug Choice - Mercruiser 7.4 LX MPI

    This may be a question more for folks like Don S or Bond-o , but I thought that I would put it out in the forum for everyone's input. So, when I bought my boat last Fall (see signature below for info), the surveyor that I used pre-purchase (who is accredited by SAMS in both 'vessels' and...
  16. tpenfield

    Red banner for 90 Day+ old Threads . . .

    Just noticed that when you view a thread that is over 90 days old, a red banner displays a warning not to post to old threads. nice addition :thumb:
  17. tpenfield

    Rustoleum Cold Galvanizing Paint for the Outdrive . . .???

    I read a thread over on THT where someone used Rustoleum's CGC to paint & protect there propeller with good results. I was going to try that on my SS props and maybe even on the outdrives. I know that there are a few Rustoleum fans here, and I wondered about thoughts and experience in using...
  18. tpenfield

    3D Printers . . .

    One of my colleagues at work has recently bought a "3D Printer" for his use at home. He can replicate all sorts of parts and objects in true-to-life form. It sounds like it would be great for re-making plastic parts to kids toys, etc . . . or even boat parts. . . you know the delicate ones...
  19. tpenfield

    Costa Concordia Update on 60 Minutes (12/16/2012)

    I just saw that there will be some coverage of the current happenings with the Costa Concordia on 60 minutes tonight.
  20. tpenfield

    Positive flotation in 'bigger' boats . . .

    I have been thinking about the idea of positive flotation for my new (to me) boat and wanted to see if anyone out here in iBoats land has dealt with this in the past. (nothing really comes up in the search pertaining to ‘bigger’ boats . . . ) My previous boat (Formula 242) supposedly had...
Top