Here's your parts.
https://www.crowleymarine.com/mercruiser/oem-parts/stern-drive/1998/4111021n2?mdl=5JH6ZE&q=0M337102
https://www.crowleymarine.com/sb/2/2589
What is the part number of the GLM impeller? Hopefully 89623.
https://www.volvopentastore.com/Seawater-Pump/dm/qty_1060804.1--store_id.366--view_id.790262--viewcart.long
3862567
21213660
Replaced by
21951348
https://www.boatingsolutions.com/89623-glm-impeller-kit-volvo-penta-21951348-p18886
If...
I believe one of your best chances of obtaining a Hurricane specific wiring diagram will be somewhere within the following link for you as it seems someone may have access to them to share.
https://forum.hurricaneboats.com/categories/electrical-discussions/p2...
Might want to try using a noid light tester at each of the wires to see if the injector circuit is working properly. I believe some auto parts stores will rent the noid lights at no cost such as Oreilles...
If the engine runs at all no matter how it runs then the fuel injectors are indeed firing and the ECM is controlling the Injector pulse width hopefully at the correct timeframes and with enough proper flow which is most likely going to be okay.
It could either be flooding to much fuel or not...
The material type and the way it's being distributed is a gray area here on iboats Dan.
The strong point of it is from guideline number 3, Do not post copyrighted material or request that anyone else violate copyright law.
Over the years some leniency may had been granted to certain aspects of...
Hi there, welcome to iboats, One of the best ways to find the correct parts for your engine is by using the engine serial number.. If you have the serial number handy, it will help take out the guesswork.
To the starter or from the starter on up to the engine when tested with either a multi meter or test light?
Some models has either a 50 or 90 amp fuse connected to the main starter post which protects the engine components.
Do you see a block type fuse device connected to the battery cable...
https://www.crowleymarine.com/sb/2/13057
Situation A blocking diode is used in the electrical system of MerCruiser V6 and V8 engines with TKS (Turn Key Start) carburetors. When the engine is warm but is not running, a temperature switch allows positive current to flow to the TKS heater module...
What year is the engine? Is there a serial number? Photos may help here too.
https://www.scribd.com/document/385929465/2008-Mercruiser-service-manual-index-pdf#
This one just has more of the 454 Magnum appearance to me vs being the 7.4 Bravo design found in and around 1996... plus searching the number seen on the oil filter adaptor sort of helps support that visual by riser design.
As mentioned, try to get the engine serial number as it should help...
Gasket Item numbers 43 and 44, https://www.mercruiserparts.com/bam/subassembly/30957/983/30
Missing gasket number 40 in the photo?
https://www.mercruiserparts.com/bam/subassembly/30957/983/50
https://www.mercruiserparts.com/bam/subassembly/30957/983/60
This parts breakdown of the starter should get you by with other parts if needed, https://www.mercruiserparts.com/bam/subassembly/32845/6993/60
68575T 2
PINION (1 required per assembly)
68575T 2 - PINION NLA [ More info ]
Unavailable
DV365 - Starter Drive [ More info ]...
What is your engine serial number?
Do you have the part number?
There are 2 other aftermarket part brands available that are a lower cost for a new starter if interested in knowing.
