Search results

  1. Bondo

    SEI Alpha 1 Gen 2 lower ratching noise (with video)

    Yes,....
  2. Bondo

    1987 GM 305 x 2 rebuild questions.

    Ayuh,..... All that changed in '86,...
  3. Bondo

    cannot find model year for 228R using serial number

    Ayuh,..... Welcome Aboard,...... It that the Motor number, or the Drive's number, or the Transom housing number,..??
  4. Bondo

    Assembling a 4.3 MerCruiser v6 - Parts check needed

    Ayuh,..... I wouldn't trust the heads you've got, til tested, 'n rebuilt,..... If one, or both are cracked, a set of Vortec's is the only answer,..... At that point, the crate motor is lookin' pretty cheap,....
  5. Bondo

    anybody need a good used prop shaft??????????????

    Ayuh,..... When I left ny, I gave away abunch of shafts like that one,....
  6. Bondo

    Fuel pump clear vent tube

    Ayuh,..... Welcome Aboard,..... Yer right,.... I'd be lookin' at the other fuel pump,.....
  7. Bondo

    Assembling a 4.3 MerCruiser v6 - Parts check needed

    Ayuh,..... Yer gonna have a million dollar motor by the time yer done,.... Why, O Why, didn't/don't you buy a long block current issue crate motor,..??..?? You'd have a better motor, with more power, for a boatload less money spent,.....
  8. Bondo

    Alpha 1 Gen 1 oil fill hose

    Ayuh,..... Just be very careful you don't get filings into the care when yer opening the hole for the insert, or when shortening it to fit,....
  9. Bondo

    Alpha 1 Gen 1 oil fill hose

    Ayuh,..... Welcome Aboard,....... 1) The Alpha 1s didn't have 'em originally, so no,.... 2) With care, a 3/8" - 16 helicoil can fix that housing,...
  10. Bondo

    1995 Stratos FS 278 Slow?

    Ayuh,.... Welcome Aboard,...... Without the Rpms @ Wot, it's an unknown,....
  11. Bondo

    Prop Help

    Ayuh,..... It looks to me, that you have a long shaft motor on a short transom,....
  12. Bondo

    Tohatsu 9.8 prop

    Ayuh,.... Welcome Aboard,...... What is the rated rpms supposed to be,..??
  13. Bondo

    Water tank fittings

    Ayuh,..... Is the fitting brass or plastic,..??
  14. Bondo

    Bravo III Wiring

    Ayuh,...... The trim pumps need 3 wires,.... Red for battery power,... Blue for up, 'n green for down,.....
  15. Bondo

    1987 GM 305 x 2 rebuild questions.

    Ayuh,.... Call yer local GM dealer, 'n ask them,.... It might be cheaper than you think,....... As for the over-bore, any more than .040 leads to thin walls, 'n cylinder hot spots, which can lead to an early failure,....
  16. Bondo

    1987 GM 305 x 2 rebuild questions.

    Ayuh,.... Welcome Aboard,...... It'll be cheaper, quicker, 'n easier to drop in 2 new long block crate 350s, that to rebuild the junk you've got now,.... 'm all the accessory parts off the 305 will bolt right on,.....
  17. Bondo

    Mercruiser 3.0 Leaking Water On Top of Manifold

    Ayuh,..... Welcome Aboard,..... Can't be the intake manifold gasket, No water behind it,.... Head bolt is possible, I use a teflon paste on mine, were yer's sealed at all,..?? Is that hose right there leaking,..?? The t-stat housing,..?? or it's hoses,..??
  18. Bondo

    Swap drives from one boat to another. How many day project?

    Yes,......
  19. Bondo

    I just got a 1980 Renken w/OMC stringer

    Ayuh,..... Welcome Aboard,...... 2 minutes run time without water flow is plenty of time to smoke the rubber raw water pump impeller,..... Never, Ever, run a raw water pump, without water flow,....
  20. Bondo

    1971 3.0 Liter Carb Question..

    Ayuh,.... Posting the motors serial number usually helps,.....
Top