Search results

  1. R

    1994 Mercury 40HP 2 stroke outboard overheating

    Metal cups in water pumps are all off center !
  2. R

    1st Boat

    But it all depends on whether you can find a shop that is willing to work on Evinrudes.-----I know of a shop that bought all the new spare inventory of Evinrude parts from another dealer.----That dealer is now saying no to every Evinrude service enquiry I guess.
  3. R

    1977 Johnson 140 can’t turn over

    Bad starter.---Bad lower unit, checked the oil ??--Bad solenoid ?--Bad cables?-----Bad bearings in engine.------Simple test, can you ( or neighbor ) pull it over with a rope on the flywheel?-----Should be easy to figure out.
  4. R

    Mid1980's Mercury 2cyl 35hp Spark Plug Question

    Just marketing 101 in my opinion-----Plus the legal aspects of dealerships and aftermarket parts marketing,-------Sort of like GM and AC-Delco
  5. R

    1978 Mercury M-800 starting issues

    I guess I missed the part about the 3 starters.----Good luck with your motor.
  6. R

    Mid1980's Mercury 2cyl 35hp Spark Plug Question

    I think " Quicksilver " is the brand name for Mercury accessories.------Such as oil , props and repair kits.
  7. R

    1978 Mercury M-800 starting issues

    Take the starter apart for inspection.----Load test the battery.----Inspect battery cables.
  8. R

    Intermittent spark on 1976 35 HP Evinrude

    Sounds like it was rust.----I doubt that was the issue in this case.
  9. R

    Have a 1984 50HP DT50 suzuki motor

    Caution-----When a motor is recovered you MUST get it running ASAP.-----Corrosion of bearings starts as soon as oxygen get at the parts.----Get a shop to help you yesterday!
  10. R

    Help Buying Boat

    Are you planning to do any maintenance yourself ?-----Check with shops to see if they work on these older motors.-----The Evinrude in first picture may well be a 79 / 80 model.----Any model numbers for these motors ?
  11. R

    96 johnson 150

    That procedure is done all the time.-----Mark TDC for each cylinder and check the firing.----Perhaps wires from powerpack to coils are mixed up.
  12. R

    J30JRSIE 30 hp Outboard - Carb Question

    Put the jet back in and test run.
  13. R

    J30JRSIE 30 hp Outboard - Carb Question

    It has a calibrated hole.-----Lets a certain amount of air in.---Order the correct part.----No reason why anybody left it out.-----Perhaps they lost it.
  14. R

    96 johnson 150

    Fuel pumps run with PRESSURE pulses from the crankcase of one cylinder.
  15. R

    96 johnson 150

    Nothing wrong at 105 PSI
  16. R

    Help Identifying and fixing vintage Sears outboard motor

    Name of a baseball player( Ted Williams ) on it anywhere?----Or " game fisher " on it ??------I think it might be built by ---Tecumseh-----
  17. R

    96 johnson 150

    ???----These motors have hole in the cylinder wall.-----Bleeds off a bit of compression at cranking speeds.-----So 105 might be normal on one of these.
  18. R

    Bad Miss

    Could be the classic lean sneeze.-----Open low speed mixture needle 1/4 turn.-----Or if motor sat with fuel the carburetor it might need cleaning.
  19. R

    I messed up,Need advice please!!

    Changing the driveshaft would be the quick way for me.----If you go that way the replacement shaft and pinion will need to be shimmed.---------Your location ?
  20. R

    96 johnson 150

    Have you checked the shift switch ???----An item found on the MOTOR linkages.----Shuts off spark to 3 cylinders during shifting.----If it is sticky ???
Top