Search results

  1. R

    1957 Johnson Rd-19 35hp questions

    The list of cowling seals is from------nymarine----A good guy in Ontario , Canada
  2. R

    1998 Evinrude 90 SPL WORTH

    Sounds like a good deal to me.
  3. R

    1968 Johnson FD-16A

    The coils are garbage.----New ones are cheap.----Not worth wasting time to test them.
  4. R

    1968 Johnson FD-16A

    These motors are elegantly easy to repair.
  5. R

    97 25hp 2 stroke fuel issue

    The older (1960 / 1970 ) metal tanks are better than the modern plastic ones.
  6. R

    12 ft lonestar 9.5 johnson

    Coils are cheaper today then they were 50 years ago.
  7. R

    Johnson Outboard Power trim issue

    There is no 3 cylinder 140.------Model # is ?
  8. R

    No shut off

    In order to stop the motor the black / yellow stripe must go to ground.
  9. R

    No shut off

    Neutral safety switch has to do with the starter only.-----Look for a black / yellow stripe wire.----Perhaps it is disconnected somewhere.
  10. R

    1968 Johnson FD-16A

    The motor is a 1962 model !----Does spark jump a gap of 1/4" or more with a " snap" you can hear , yes or no ?
  11. R

    1992 Evinrude 150 aluminum in cylinder

    Can't blame folks for trying.----Some of us know that the technical knowledge of fine machinery today is nowhere near what folks knew 30 years ago.-----Folks are qualified in --" button pushing " ----it seems.
  12. R

    Do you have a 1989 150 (non-fast strike)??? Can you help me out with a photo?

    Powerpack simply mounts on top of the block with 3 screws.
  13. R

    1957 Johnson Rd-19 35hp questions

    Just looked at a 1974 model 40 HP.---Yes, same water tube part # .----Clearly it comes out the top.----Should not be a struggle to remove it.
  14. R

    1987 Evinrude XP 150, Leaking black oil from midsection????

    Gasket between block and exhaust housing leaking ?
  15. R

    Need a CDI for a 1979 to 1983 120HP mercury outboard

    your location ?----Agree with above about 120 HP being very rare.----Part # you need ?
  16. R

    97 25hp 2 stroke fuel issue

    Pull off the top plug wire.-----Try and start the motor.-----Repeat with other cylinder.-----Checked reed valves ?----Checked flywheel key ?
  17. R

    Johnson 90 hp fuel line connection

    Correct that is the oil line going to the VRO unit.----Perhaps it was properly converted with a conventional pump mounted directly over the pulse port.-----Fuel pump would be small and mounted directly in front of starter.----Do the compression test.---Post the actual values here.
  18. R

    1993 Johnson 4hp not pumping water

    Testing in a bucket?----Water needs to be 6" above the impeller.
  19. R

    engine miss after installing vro to pre-mix pump

    Then get rid of that fuel pump.-----Sounds like it is clearly the issue !
  20. R

    Changing throttle styles

    Are you sure the Morse does not have a fast idle feature ?
Top