Search results

  1. flashback

    Wiped cam lobe mechanical fuel pump

    I got a 4 inch pipe to install in the port then a t fitting on the end of that, gooped the threads with #3 and then installed the senders into the t.
  2. flashback

    boarding ladder

    What brand did you get?
  3. flashback

    Can you paint an outboard cowling with automotive spray paint?

    15 years ago I used silver Rust-Oleum in a rattle can it has sat out in the weather since and though a little dull now still looks good. Fwiw.
  4. flashback

    boarding ladder

    Thanks for the link. I like the under mount what would be ideal would be a telescope ladder the same width as the old. Then I could use the existing mounts.
  5. flashback

    boarding ladder

    Searay 95 22ft weekender. The 2 step ladder that came with it is useless. Thinking about a 4 step telescope ladder. I've seen some that fold over the platform and some that slide into a track under the platform. not much difference in cost so that's not an issue. Just wondering what some of you...
  6. flashback

    What reason causes the water leaking into gimbal bearing house?

    It drains into the bilge if it's not stopped up with gunk.
  7. flashback

    What reason causes the water leaking into gimbal bearing house?

    The gimbal bearing housing has a drain hole not the bearing. If you're bearing has a hole that is for grease.
  8. flashback

    Does anyone remember when car & boat engines only had.

    On flat ground
  9. flashback

    Watch this Mercury approach a sand bar 😆

    Typical, they don't tell you how much of that Sandbar the motor ingested.
  10. flashback

    What reason causes the water leaking into gimbal bearing house?

    may want to get a new gimbal bearing or you'll be in there again soon.
  11. flashback

    Inflatable Boat Trailer Suggestions

    Fwiw, the utility would be my pick, that way you can use it as for other tasks.
  12. flashback

    Stupid me, no oil

    Oil pressure sending unit?
  13. flashback

    New Pontoon

    You got to mix oil with the gas if you want it to smoke 😜
  14. flashback

    Brass block drain plug leaking like a sieve

    I installed ball valves on mine but you still need to rod them when draining.
  15. flashback

    Water Pressure Sensor . . .

    I think I'll read a book!
  16. flashback

    removing paint from gel coat

    Don't you like the current name? I might try to live with it.
  17. flashback

    Best way to gain a little speed with 40hp engine

    Some prop shops will let you buy a prop and try it. If it doesn't suit and you haven't damaged it they will exchange for a different pitch.
  18. flashback

    Waterpump repair help

    It's not technically a seal think more of a shield that keeps debris away from the bearing in the top housing.
  19. flashback

    Why I'm nervous boating at night...

    I get alot of bass boats running the river wide open in the night. They are generally lit up. I worry for them.
  20. flashback

    Bilge blower question.

    I'm thinking the plug itself is fubar
Top