Search results

  1. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    I'll probably do the same thing.
  2. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    I'm not sure I understand the question. 🤷‍♂️ But I also need to provide some clarification. I haven't gone through and replaced every 5/32" rivet on the boat with a 3/16" rivet. What I'm doing is replacing the smaller rivets with the larger ones when I find a 5/32" rivet that actually...
  3. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Nice work! I noticed the different size rivets on my Chieftain as well. I decided to upgrade all the 5/32" rivets to 3/16" both for increased strength and to reduce the need for a variety of sizes.
  4. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Well, we're at a screeching halt right now. I tested Covid positive this morning. ☹️
  5. BWR1953

    Mercury 35 hp outboard timing

    Make sure that the gas tank vent is fully open. Don't ask me how I know. :rolleyes: :ROFLMAO:
  6. BWR1953

    My Starcraft

    🤪 :ROFLMAO:
  7. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Only a bit more progress today, but we had to run errands this morning. Got the stringers clean. Shiny! Reminded me of this 1980s song. 🤪 :ROFLMAO: Yesterday we received the 1/4" solid rivets in 3/8" and 7/16" length, so I decided to do a quick test in one hole. Worked perfectly...
  8. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    The boy and I got out there early this morning, before 0900, but didn't got a lot done. 😏 My young neighbor buddy had moved out west back in the winter and is back in town for a few days to get his house ready for sale. So, we went out to lunch and then visited for most of the day. He's...
  9. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    That time sure better count towards production, otherwise I've wasted a LOT of time!! 🤪 :LOL:
  10. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    I dropped the knee brace off with a neighbor friend last evening. He's going to make repairs for me. :)
  11. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Yup. I o ly I used this mini-drill press and it worked well on my Kingfisher. Gonna use it again on my Chieftain. :cool: https://www.amazon.com/gp/product/B000JCIMEA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  12. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    Finally! Some progress today! :cool: Our primary goal today was to get the stern patch ready for installation. It took a long time to figure out how to ensure that the holes for the patch were in the right place on the hull. We ended up deciding to drill holes down the center of the patch...
  13. BWR1953

    1973 Starcraft SuperSport 16ft. restoration questions

    Awesome! (y)
  14. BWR1953

    16 foot 1985 Grumman Aluminum Boat

    I'm in the process of dealing with corrosion repair on my Chieftain project. Mostly at the stern. The brazing option doesn't work if you're close to seams which contain sealant, which could heat up and be destroyed or leak out. In other, more open areas, it might work fine. I'm using JB...
  15. BWR1953

    '67 Holiday 18' - Make it Usable

    That's what I use too.
  16. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    No work done the last couple of days. I was out of town yesterday, we had an appliance repair guy here this morning and then we had to run errands this afternoon. But! One of those errands was to have the 0.080" sheet patch rolled to shape. And I'm pleased to say that it fits perfectly under...
  17. BWR1953

    Where do I belong? Alum Goods 1687, SS16 Clone?

    When I first got the Kingfisher, it had a bench seat. And that really suuuucked! :rolleyes: Having to climb over and around that thing in order to move fore and aft stunk. And with 2 or more people moving at the same time, it was not only annoying, it made the boat more tippy. Retrieving...
  18. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    I got out there early this morning and started drilling out the marked rivets with a 3/16" DeWalt bit. And as happens many times, found problems. Like extra large rivet holes. Sigh. :rolleyes: And this one got a little lop-sided during the drilling process. 😬 But, I test bucked a...
  19. BWR1953

    20 seconds to start peeing on muffs

    Man, I wish I could achieve that! :ROFLMAO:
  20. BWR1953

    1976 Starcraft Chieftain 18' OB - restomod

    More progress today. Much of it a learning experience for both the boy and myself. And some lessons were painful! :LOL: We did some more cleaning and then moved on to rib reinstallation and rivet stuff. We both had to learn about installing solid rivets, a first for us. 🤓 I showed the...
Top