Search results

  1. Bondo

    Water leak around trim hoses on Alpha

    Ayuh,..... The trim manifold is gasketed, might be there,....
  2. Bondo

    5.7 Automotive Intake manifold

    Ayuh,..... Or go with cast iron, rather than aluminum,....
  3. Bondo

    First time cleaning a carb, ruined the jets?

    Ayuh,...... 'bout half past three, a huge trophy buck will be walkin' out at ya, hopefully slightly to yer left,...... :)
  4. Bondo

    Hey Mods

    Ayuh,...... Thanks fellas,...... Yes,.....
  5. Bondo

    Using navigation lights with bow lights in unison.

    Ayuh,..... When boatin' on big water at night, pitch black dark is where ya want to go,..... Lights mean danger,.....
  6. Bondo

    Excessive fuel during fuel filter change

    Ayuh,..... 'n the filter is on the vacuum side, no pressure, at all,.....
  7. Bondo

    Problem with a Mercruiser 5.7 V8 LX

    Ayuh,..... Delco Voyager is a great choice,.....
  8. Bondo

    engine kill switch.

    Ayuh,..... Yellow/ red is the Start circuit,.... Purple is the ignition,....
  9. Bondo

    1979 pre-alpha 165 Merc cruiser

    Ayuh,...... Stop, startin' new threads about this same issue,..... If ya wanta bring it to the top, just post in This One,.....
  10. Bondo

    Winterization

    Ayuh,..... That'll work,......
  11. Bondo

    Electrical charging problems on volvo penta 7.4

    Ayuh,..... An alternator will only put out, what the battery calls for,.....
  12. Bondo

    Winterization

    Ayuh,...... 4 plugs, 2 on the block, one each manifold,..... if hex plugs, a 9/ 16" wrench is the ticket,...... If the blue plugs, fingers, or pliers,..... Pull the bottom of the Big hose off the water pump,..... 'n drain the p/s - oil cooler in the in-comin' water line from the drive,....
  13. Bondo

    Mercruiser 233 Overheating--Out of Ideas

    Ayuh,..... That's in the water, drive down,..??..??
  14. Bondo

    Fogging oil won't kill engine

    Ayuh,....... 'cause marine suppliers have convinced anal diy boaters, that it's the Only way to put their baby to bed,.... :)
  15. Bondo

    complete Alpha one Gen one retrofit into older boat.

    Ayuh,..... Turn the bearin',..... is it butter smooth,..??..?? if so, run it,.... If it feels gritty, put a new one in,....
  16. Bondo

    Merc 4.3

    Ayuh,..... I think that's 'bout '94,..... Vortec heads in '96,..... My '94 w/ bal. shaft has better than 2,000 hours on it, sittin' on a dolly, waitin' to get dropped into another hull, right now,..... Great motors,..... Got the ole Buick/ Jeep V-6 in my CJ5,....
  17. Bondo

    350 MAG winterizing - which method is correct?

    Ayuh,...... As long as you start with the entire raw water system, Drained,..... You can do whatever ya want with the antifreeze,..... Air, don't freeze,.... ;)
  18. Bondo

    1400 RPM loss from 13 to 15 pitch!!!

    Ayuh,.... Or as Scott suggests, have some more cup beat into yer 13" prop,.....
  19. Bondo

    TWIN 1994 VOLVO PENTA 8.2 OVERHEATING

    Ayuh,..... Welcome Aboard,..... Addin' heat exchangers to anything but brand new motors, is a bad idea,..... The rust, 'n sediments in the blocks, can, 'n does plug up the passages in the side of the exchangers you can't clean out,.... Donno that, that is yer problem, but it can be,....
  20. Bondo

    Can you use 2 stoke oil in a prestolite, trim pump?

    Well,..... I've used Atf, motor oil, 'n hyd. oil, but never 2-stroke oil,..... Can't think of a reason it wouldn't work, just never tried it,..... 'bout any oil that doesn't attack the rubber seals, 'n o-rings, oughta work Ok,....
View older results
Top