Search results

  1. flashback

    Water in reservoir

    Must be a major leak if water is showing up in the monitor jug.. I would drain the drive ASAP.
  2. flashback

    Where’s the gas gauge sending unit ?

    Buy an access plate, cut hole in floor to fit, replace sender and install access plate although you probably have bigger problems if the tank is leaking..
  3. flashback

    Gipsy - 1996 Sea Ray 210 Bowrider restomod

    You have a good start and don't want to compromise with someone so simple as filler..if you have the coin you might consider using full epoxy.
  4. flashback

    Gipsy - 1996 Sea Ray 210 Bowrider restomod

    That's a good concept but be sure it doesn't absorb water like bondo.. I've seen bondo turn to mush in below waterline applications..
  5. flashback

    Gipsy - 1996 Sea Ray 210 Bowrider restomod

    It's looking lovely.. nice clean job....
  6. flashback

    1996 maxum 1900 full throttle issue

    +1 Be sure bugs haven't clogged up the tank vent.. happens often..
  7. flashback

    Kodiak Anchor - Made by SouthCoast Marine . . .???

    Off hand I'd say it's sub standard for your use, probably work well for me.. I'm not paying shipping.. LOL
  8. flashback

    Marine hand held radio

    Yeah I'm in the same boat, I was given the boat 2 years ago and it needed a lot of mech help so that was my priority. The radio in the cabin didn't turn on and now that the boat mech is stable I may play with it. But honestly here on the river most folks just use it to raft up or BS with the...
  9. flashback

    Shift interrupt switch - how to adjust??

    I'm not familiar with the new tech stuff. At low speeds you will use more fuel. Your pushing a brick thru the water.. your better off at plane speed.
  10. flashback

    Shift interrupt switch - how to adjust??

    I wouldn't worry about the mm bouncing looks like your in the high 7s. As long as your idle speed is 4-5 mph your good..
  11. flashback

    888/233 Out Drives

    Looks like all you really need to do is verify the RPMs..if 5k is accurate you can go 19p on the prop..
  12. flashback

    888/233 Out Drives

    You didn't enter any prop slip, heck they all slip some...
  13. flashback

    888/233 Out Drives

    Looks good on the outside heck it still has a complete fin! :)
  14. flashback

    Making engine beds

    I wouldn't worry to much your mounts are adjustable to a certain extent
  15. flashback

    Bilge blower turned on and quit

    Don't know what you're working with but most blowers have a fuse or breaker at the helm
  16. flashback

    Dual tacometer

    Thanks for the laugh! Tacometer. ,I love it Please don't be offended..
  17. flashback

    Easier time putting on the trailer

    Yeah pretty much!
  18. flashback

    Easier time putting on the trailer

    It's a learning experience, steep ramp, not so deep, shallow then the delivery vehicle may get wet..it takes some practice..
  19. flashback

    Easier time putting on the trailer

    We've done a good job of de-railing this thread, probably would be a good time to help..
  20. flashback

    help with 1989 Celebrity Boat (5.7 Mercruiser)

    Not looking for a debate, 2 year old fuel, water , and trash will not be a good thing to introduce to your sleeping motor..
Top