Push the top link of the clamp toward the engine.
Continue pushing until it snaps / locks in place.
To release the clamp, push the little tab (touching the eraser) , push the tab toward the engine and lift it upward.
Don't use force, if it doesn't release, you are pushing the...
No Title
photo 1, fully assembled.
photo 2 place the "cup" into the recess, and place the cylinders into the cup.
photo 3 lift the clamping bar up and over the cables.
Do you seat the hub parts together before installing on the prop shaft?
In other words, do you press/hammer them together?
I have read that some people do.
Have also read that it is not needed.
Just install, then torque to 100 ft lb to seat, then back off the nut, 55 ft lb being the minimum...
Really can't tell if that one will work.
The term "shaft length" is misleading.
You don't actually measure the drive shaft.
You measure from the transom mounting bracket, to the anti cavitation plate,
the area between the 2 red lines in the photo below.
The standard length are below...
You want "Simple" ?
Pick up 2 magnetic mount LED flashlights and slap them on the back of the trailer when you get to your driveway.
They are about $7 in the checkout lane at the hardware store, and a couple batteries should last you a year or 2.
I have an I-6 115 hp 1986, that I would like to add a water pressure gauge to.
Where is the easiest location on these motors to connect pressure tube ?
"Fixed wing" or "small fixed wing" aircraft is a term that comes up in the news occasionally.
As opposed to a plane that flaps its wings like a bird?
Aren't most planes "fixed wing" ?
I know there are some planes on which the wings move, but aren't they the minority, especially in small...
Here we go again, starting early, just like last year.
tonight, 1"
Sunday 1"
Monday 5-8"
Mon pm 3-5"
Tuesday 1-2"
So somewhere between 11 and 17 inches by Tues am.
Followed up with low temps of
9, 5, 3, 4, 4, 5, 1, and -3
I recently upgraded my kicker, wanted a bit more umph, and found a great deal on a Merc 15 with electric start.
Now I'm looking for a new prop for trolling.
Looking to slow the boat down.
Currently running a 3 blade 9p prop. It runs at almost 3 mph at idle.
Options are either a 4 blade 10 x...
http://www.theblaze.com/stories/2014/10/16/lockheed-martin-announces-revolutionary-energy-development/
Lockheed Martin announced Wednesday it plans to deploy a nuclear fusion energy reactor within 10 years
Add "Location" back into the username info?
I really don't think the member rank needs to be posted twice, one inch apart. Maybe replace one with location?
It is often valuable to know what country, climate (cold or warm), or if the boat is used in saltwater, when diagnosing a boat, motor, or...
Friend of mine dropped in last night.
Haven't seen him in a few months, but his cousin "cold rain" has been staying with me over the summer.
How'd you guys do up north?
.
