Search results

  1. jerryjerry05

    1994 Force 120HP - Tilt/Trim not working, can hear both relays "click"

    Re: 1994 Force 120HP - Tilt/Trim not working, can hear both relays "click" Auto Zone or any auto parts store. Don't buy a cheap one. Get one with a long cord. You don't plug anything in. You hook the test light to any GOOD ground. Then apply the point to the green/blue leads as someone hits...
  2. jerryjerry05

    messed up fuel pump diafram replacement

    Re: messed up fuel pump diafram replacement They sell a gasket sealer that's gas resistant.maybe a small bead on the tear? The hole behind is the vacume lead for the operation of the pump. There is an X shaped gasket that fits there.#2 in the pic.
  3. jerryjerry05

    1987 Force 50 hp leaking fuel out exhaust and drain hole.

    Re: 1987 Force 50 hp leaking fuel out exhaust and drain hole. What's the compression #s? A clean plug is not good. Switch it around and see if it cleans the other. Like food says a clean plug is getting water or not getting gas? I had a head gasket go bad. Still had 145# of comp but had water...
  4. jerryjerry05

    88 50hp force not sure if water pump is workin

    Re: 88 50hp force not sure if water pump is workin The muffs are the one the 50 needs. The impeller can't be put in wrong. It will orient itself as soon as you crank it. If you don't have the right muffs you need to put it in a deep bucket. 90% of the water should come out the snout under...
  5. jerryjerry05

    Trim motor replacement.2002/125 Merc.

    How do you change the trim motor on a 2002/125 Merc? OT511345 It's reallllly rusting BAD.My friend wants to change it. And before I start, I want to know how to change it. Any U-tube videos? Thanks,Jerry
  6. jerryjerry05

    1987 force 50 hp- no spark in both plugs.... new to this motor and need help

    Re: 1987 force 50 hp- no spark in both plugs.... new to this motor and need help Get a spark tester.One that measures spark strength. Weak spark could be a loose connection,loose ground,wire under the flywheel rubbed through and touching? Shorted stator? Go to outboard ignition . com or...
  7. jerryjerry05

    Force 35 Hp Overheating

    Re: Force 35 Hp Overheating Your motor needs a special kind of muffs. The regular ones don't seal as good. They might work but might not. See the pics,this is what you should get/use.
  8. jerryjerry05

    Chrysler ignition switch wiring

    Re: Chrysler ignition switch wiring Not sure this will help.
  9. jerryjerry05

    85hp force cannot get flywheel off!!!

    Re: 85hp force cannot get flywheel off!!! I use black silicone.
  10. jerryjerry05

    My first boat and motor - 1993 Force 120 No spark from any spark plug

    Re: My first boat and motor - 1993 Force 120 No spark from any spark plug Try this,It might help?
  11. jerryjerry05

    Tools for Static timing.

    A timing light,a jumper or jump box. And someway to ground the leads. I'll get the directions and post them soon.
  12. jerryjerry05

    Trying to get rich off the unsuspecting.

    Watch what you see on the net. Defective.You'd have to fix it as soon as you get it. F660541 Force Outboard 85 125 Hp Power Trim & Tilt Pump Unit #(130864423829)
  13. jerryjerry05

    Pop...Goes The Flywheel!

    Re: Pop...Goes The Flywheel! You got lucky???? Some just "pop" right off some don't.
  14. jerryjerry05

    89 Force 50HP prop tangled w/ earmuffs

    Re: 89 Force 50HP prop tangled w/ earmuffs ANY!!!! nicks/cuts or abrasions on ANY splines or grooves will stop/slow the movement of the clutch dog. A small file,or even emory cloth smooth out the nicks. The clutch dog,it's gonna have some wear from normal use. If you have a shop or acces to...
  15. jerryjerry05

    Help wiring ignition switch-1995 Force 120 HP

    Re: Help wiring ignition switch-1995 Force 120 HP Not sure,maybe this can help?
  16. jerryjerry05

    1986 Force 85 HP Outboard - Will not start no spark

    Re: 1986 Force 85 HP Outboard - Will not start no spark I believe there is a link to an impeller replacement at the top of the Force Forum. That pic you posted isin't your motor.It's close but not yours. To make sure you get the right impeller get the right parts diagram. boats . net has the...
  17. jerryjerry05

    First time boat owner, motor has a few issues, Please Help!

    Re: First time boat owner, motor has a few issues, Please Help! No way to modify the prop into a test wheel. The test wheel is heavier and you'd never get the right results. Static timing is the closest your gonna get. I made a 3 wire, ground wire setup.I used #10 or #8 wire.See pic. The spark...
  18. jerryjerry05

    Engine de-carb.

    Hi all,I'm rebuilding a Force and working on cleaning the pistons. I thought I'd test the Seafoam or Powertune by Merc. or Engine Tuner by OMC for carbon removal. The last 2 are the same product just a different name. I took the rings off and put some liquid from both Seafoam and Engine Tuner in...
  19. jerryjerry05

    1981 280 prop shaft seal

    Re: 1981 280 prop shaft seal A tool like this will help. It can be made of thick plywood or stock steel.
  20. jerryjerry05

    Force 1989 150HP Slow cranking problem. Please help

    Re: Force 1989 150HP Slow cranking problem. Please help 1 of 2 problems? You need to do a comp test and rebuild /clean the starter? These pics are from a working,yet weak starter. Take yours apart and see?? The comp test,remove all the plugs?Jump the solenoid at the motor. Profile? Location...
Top