Search results

  1. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    Well, well,well look who stopped by to say hello... I treated JBCurt00 to some good ole' Oklahoma Joe's BBQ I think he liked it!!! He bought a very KOOL 1957-8 FeatherCraft Racer In Texas and was on his way to Springfield, MO to look at a motor. We had a great 6 hour visit!!! It's always a...
  2. Woodonglass

    Building a new dogbox over engine

    This might help... I'd use ext grade 1/2Plywood and seal it with either epoxy resin or one of my favorites... As shown carpet and vinyl makes it more functional. Some sound proofing material glued to the inside is also kinda nice.
  3. Woodonglass

    Looking for Advice on Buying a Sewing Machine for Vinyl

    Boat covers and Canvas work is a LOT different than seat and side panel upholstery. When dealing with LARGE pieces of Canvas the weight and bulk of the fabric absolutely requires the feeding power of a Walking Foot. This is not the case with small pieces of upholstery vinyl I just finished this...
  4. Woodonglass

    14ft aluminum transom repair

    I recently saw an aluminum fishing boat with DIY fabricated Transom Caps. Wish I would have taken pic. Basically the guy bout some 1/4" aluminum plate from eBay ($30) and cut/bent them to fit. This is a poor drawing but the results resembled this... He said he cut them with a jig saw (as shown...
  5. Woodonglass

    fiberglass over plywood deck restore

    I also Highly recommend using a bubble buster roller. Lots of guys only use the short nap roller and pour the resin on top of the glass. I think you get a better bond and less hassle with the glass if you lay down the resin first, then the glass and use the BB roller to force the resin up...
  6. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    OH Yeah...Green Beer is ONE of my Favorites!!!
  7. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    Well.. I've been REAL busy with this new Retirement Gig. Lots of woodworking and Honey Do's but I did manage to work in some upholstery work. Not much but enuf to knock the rust off... Pontoon Bench Seat Bottom Section. Hope everyone is having a GREAT Winter and getting ready for a Fun...
  8. Woodonglass

    1985 Skeeter Starfire Rebuild

    A cluttered shop...NEVER heard of such a thing...
  9. Woodonglass

    1980's Hydro Glass Restoration Project

    Cardboard roughly cut to the hull shape and a Pencil Compass will allow you to scribe a line from the hull to the cardboard and then cut it out to use for a template on the wood. As long as you're within about 1/4" the PB bedding will take care of the rest.;)
  10. Woodonglass

    Avenger Bass Boat Restoration

    Sounds about right. this Might be helpful too...
  11. Woodonglass

    1972 Glastron Boat Project

    Not sure if this will be of any assistance... https://www.vlvworld.com/indexframe.html?VolvoRepairManual/Section_2_3.htm
  12. Woodonglass

    Stringer Concern.... Sea Sprite

    This list may be of interest. You DON'T need 15 yards of 1.5 oz CSM 5 yards should be plenty You'll use it for the underside of the deck and that's about it.
  13. Woodonglass

    Best Way to clean up an old aluminum canoe

    My picture didn't post correctly. The Product I was Trying to show is Mothers Aluminum Polish. Walmart has it.
  14. Woodonglass

    Avenger Bass Boat Restoration

    I agree with the others. I suspect you'll find that the center transom area is built with two central stringers that extend from the bottom of the hull up to the center of the transom. Something like this rough drawing depicts...
  15. Woodonglass

    New version of Some Transom Clamps

    There is a form of deep throat clamp used in a certain style of boat building known as a ?lapstrake? clamp. This kind of clamp is used in building old-style lapstrake boats (where the upper plank laps over the lower). Also known as ?clinker? boat building. A large number of clamps are needed to...
  16. Woodonglass

    Dry rotted floor

    Go to a Local Appliance store and have them give you some refrigerator boxes. Cut the cardboard and tape it together to get 10" x how ever long you need. Use a pencil compass but tape a Medium tip Magic marker to it and then scribe the bottom of the hull putting the mark on the cardboard. Cut...
  17. Woodonglass

    Possible Non-Skid deck solution

    I been thinkin' and I Know this is a Dangerous thing!!! I would really like to hear from anyone/everyone with their thoughts and opinion. Since Poly Resin is significantly less expensive than Epoxy, what if you Tinted the Resin and then applied it over a layer of CSM and 18oz. Woven roving. It...
  18. Woodonglass

    My 1968 Glastron GT160 rebuild......

    Yeah IF you're gunna do a lot of this type work you need to make something like this... Some of you remember JDA (The Judge) and his upholstery exploits. When I visited his shop a few years back, he had two of these side by side He made his from the White Fiberboard panels and 2x4's. Sure...
  19. Woodonglass

    72 Thunderbird Formula w/twin 165hp Mercs

    Well, Has the paint fallen off yet!!!! Merry Christmas and Happy New year my Friend!!!
  20. Woodonglass

    1979 manatee floor soft spot.

    Have you core sampled the stringers and transom yet. If they need replaced you'll be buying resin and glass for sure. GM280 is spot on. No way to "ShortCut" the restoration process. You might find this helpful...
Top