Search results

  1. flyingscott

    Evinrude 60hp 3 cylinder 2 stroke cranks but won't start

    Does it have a lanyard switch?
  2. flyingscott

    1979 Evinrude 70973R 70 hp Outboard

    Mix Acetone and ATF together and use that. Have you tried tapping on the head with a hammer and wooden dowel?
  3. flyingscott

    1979 Evinrude 70973R 70 hp Outboard

    Stop what you are doing. Spray those with penetrating oil.
  4. flyingscott

    1997 johnson 150 ocean runner

    The vapor separator is right above the fuel pump.
  5. flyingscott

    1997 johnson 150 ocean runner

    Sounds like something is hooked up wrong
  6. flyingscott

    1997 johnson 150 ocean runner

    Find the pulse line and reconnect it
  7. flyingscott

    175 Evinrude ficht motor, ?????

    Well you should start your own thread. That being said RUN RUN FAR AWAY FROM THOSE MOTORS
  8. flyingscott

    1979 Evinrude 70973R 70 hp Outboard

    So it's a salty motor? Time to get the drill.
  9. flyingscott

    95 Mariner 4 stroke 9.9

    If it's cold it will be down if hot it moves up
  10. flyingscott

    95 Mariner 4 stroke 9.9

    Looks like the top of the carb has a primer on it. Make sure it is working.
  11. flyingscott

    1991 mercury sounding rough? fixes?

    Yup that motor sounds perfectly fine
  12. flyingscott

    Solenoid clicking.

    Check all the connections make sure they are shiny Brite. Also check the neutral safety switch.
  13. flyingscott

    What make fitting is this?

    Well the tank says it's quicksilver. So I amguessing it is a Mercury fitting.
  14. flyingscott

    1990 Johnson 70hp w/Video - Chasing My Tail

    That motor sounds like it is running on 2 cylinders
  15. flyingscott

    1990 Johnson 70hp w/Video - Chasing My Tail

    What is your compression? Spark jump a 1/2" air gap?
  16. flyingscott

    Putting a tiller handle on a mid 70's Evinrude 25hp

    Put up a pic of the front of the motor. Specially the steering bracket.
  17. flyingscott

    Adding charging system to 1997 evinrude 25 hp

    Should be able to do it for less than a $100. Used stator on eBay and a rectifier.
  18. flyingscott

    Am I getting water of of fuel path Properly 150's J150VXCIS 2001 carbed 150'

    Get a cheap 12 volt pump and drain your tanks
  19. flyingscott

    1996 mariner 115 HP wont start

    Ok your controller should have a button in the middle of the throttle. Push that in to disengage the shifting function. This will give you a throttle only function for starting. Push the button in and push the throttle just until you feel resistance. Now while you are starting it, Push the key...
  20. flyingscott

    1996 mariner 115 HP wont start

    Are you using the fast start lever? What about the primer? Are you using that? Carbs back on the right cylinder? You know that's a 2+2 motor correct? Starts and idles on the top 2.
Top