Search results

  1. flyingscott

    1985 Johnson 15 hp j15rcob

    1985 15 hp does not have a starter pawl. It has a gear that runs up a helix, what is your model #
  2. flyingscott

    Are Tohatsu/Merc Motors Over Propped ?

    My 2 strk 25 hp merc spins a 13" pitch prop to 6000 on light hulls. 2 strk Evinrude the same. Something is suspect on the power rating or an over geared lower unit.
  3. flyingscott

    150 Johnson rod bearings snapping

    What is the model # of your motor? My guess is you did not keep the caps and rods together. Since they are broken caps they are pair, rods and caps stay together. The bearings should interchange between rods , not the best practice but it will work. Does your motor have Crank rings? Are they in...
  4. flyingscott

    Are Tohatsu/Merc Motors Over Propped ?

    I would question the rating on the motor if a 25 hp struggles to turn a 13" pitch prop.
  5. flyingscott

    150 Johnson rod bearings snapping

    Did you make sure the caps stayed with the correct rods? Otherwise wrong bearings?
  6. flyingscott

    Looking at getting a 2013 Mercury ProXS and I have a question

    Is that a supercharged I6 Verado 4 strk.
  7. flyingscott

    Are Tohatsu/Merc Motors Over Propped ?

    I would be more curious to know what boat it is on?
  8. flyingscott

    1984 Mariner Pull Start to Electric Start Conversion. Help!

    You have a Yamaha built motor ,You cannot use any of the parts racer is suggesting here. The parts Racer is suggesting only work on the Mercury Built motors. You will need to find either a donor motor or the corresponding Yamaha Parts.
  9. flyingscott

    Need engine rebuild kit 94-96 johnson/evinrude 150 ocean runner. 60 degree

    Have you tried WSM
  10. flyingscott

    Mercury / mariner - 60hp - 2 stroke - 1989 manual

    That is a Mercury built motor call the dealership to find the manual # for you.
  11. flyingscott

    1998 8hp E8RECR Fouling and runs poorly.

    Does your motor have the manual Primer? If it does is it leaking by?
  12. flyingscott

    VRO to standard fuel pump

    If there is nothing wrong with the VRO pump, you can just use it as a pre mix pump.
  13. flyingscott

    Bearcat 55 impeller and oil filter help

    Those are the high performance version of that motor. A lot of people pulled the powerheads off of those and put them in the cars. Just because they were more powerful.
  14. flyingscott

    For those who know 70’s Evinrude / Johnson I have a slightly challenging question

    When I looked up that part # it showed the 1/2 moon key. What # was the kit you got?
  15. flyingscott

    For those who know 70’s Evinrude / Johnson I have a slightly challenging question

    Yes you got the newer style kit for your motor. This is the kit you should have got. 0438579
  16. flyingscott

    15hp johnson age differences.

    Well if you recalled it you could have just typed it?
  17. flyingscott

    40 to 50 powerhead swap

    That is a false compression reading. Let it sit overnite and try it again and your idle could be lower. look to make sure the rollers are in good shape on the 50.
  18. flyingscott

    40 to 50 powerhead swap

    Retest your compression have never seen one of those that high. What is your idle speed? THat needs to be set in gear on a warm running motor. Not unusual to have a bit of a clunk when shifting.
  19. flyingscott

    Bearcat 55 impeller and oil filter help

    Like I said AOMCI is gonna be your best bet right now. Sorry I could not help more
  20. flyingscott

    Bearcat 55 impeller and oil filter help

    well i guess good luck with them then.
View older results
Top