Search results

  1. jimmbo

    Going from 25 hp to 35 hp

    Not in the Public Forums.
  2. jimmbo

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    There was no 10 HP in 64, that was the yr the 9 1/2 was introduced. Your 10 was made between 1951 and 1963
  3. jimmbo

    1957 Johnson Rd-19 35hp questions

    When You do the Compression Test, unless you are using the Electric Starter, you will have to disable the Compression Relief Mechanism If you mean Generic Brands of Marine Gear Oil, you should be Okay. However I wouldn't recommend Auto Gear Oil.
  4. jimmbo

    1957 Johnson Rd-19 35hp questions

    Marine Gear Oil will be fine. Mercury and BRP market good ones.
  5. jimmbo

    1957 Johnson Rd-19 35hp questions

    This might help http://www.fiberglassics.com/library/images/e/ea/Johnsonservice002.pdf
  6. jimmbo

    89 Mercury Classic 50 won’t open up

    Sounds like Shorts, and Internal Breaks in some Wires
  7. jimmbo

    1957 Johnson Rd-19 35hp questions

    35hp @4500 rpm WOT Range 4000-5000 rpm 21:12 Gear Ratio Point Gap 0.020" Plug Gap 0:030" Spark Plug. J6J was the Specified Plug, but as to what has Superseded that Number I don't know Being that is almost 70 yrs old, what condition were the Ignition Coils? Edit: I actually have the Owners...
  8. jimmbo

    50hp Johnson 2 stroke prop

    That is wonderful, but in reality tells me Squat... Yr of Engine WOT Rpm range of that Engine What WOT Rpm you are currently getting Make and and Model of the Current Prop are some of the Info that is REQUIRED, before any Objective and Accurate Propping Advice can be given.
  9. jimmbo

    50hp Johnson 2 stroke prop

    Welcome to iboats 30-33 mph on an 18ft Boat with a 50hp, is actually very good. Now without more info, it is a Waste of Time to give any Recommendation https://forums.iboats.com/threads/read-this-first.282907/
  10. jimmbo

    Going from 25 hp to 35 hp

    Can the Spark jump a 3/8" Gap on both Cylinder? Have you ever disconnect one of the Plugs and see how the engine runs under Load, then tried it with the other unhooked? Is there any signs of Oil-Fuel running down from the top of the Block? Is the Carb opening Fully? How long have you owned this...
  11. jimmbo

    Bogging at full throttle intermittently

    Welcome to iboats Might be a Fuel Starvation issue, That last 20% of the Throttle Lever Arc, really increases the Demand for Fuel. You say you replaced the Fuel Lines. does that include the Lines between the Connector to the Pump, and from the Pump to the Carb(s)? When you have the issue, have...
  12. jimmbo

    Prop size?

    As long as the Boat isn't underpowered for its Weight, and Load, you should be fine. Edit: Is your engine a 2 Stroke or a 4 Stroke?
  13. jimmbo

    Why is my gas orange?

    Perhaps a very thick layer of Varnish in that Tank/Fuel Line, to be able to overpower the Blue Dye in the Oil. While Lacquer Thinner is good at dissolving Gum and Varnish, it might reck havoc on the O-rings located in the Tank Disconnect, so some Caution, maybe removal of the Pickup-Float-Gauge...
  14. jimmbo

    loading up pictures on this site

    I expect Rod Sterling to appear, and end his chat with "The Twilight Zone..."
  15. jimmbo

    loading up pictures on this site

    There was an "Improvement/Upgrade" made recently...
  16. jimmbo

    SS Prop for Volvo SX

    Years ago there was a Launch at that Rock Canal near Sundance, but about 20 yrs ago, they blocked Canal up. Did they reopen it? Edit: Looking at Google, it is the same One. And I see the Parking Area. I will have to check it out. Keep this on the QT, or else it will be overloaded
  17. jimmbo

    SS Prop for Volvo SX

    You did, until I started my Motor... I haven't been out since 2021. The Town Really Effed up the Launch Site, and the Park is now even Worse. Docks are almost Non-Existent. My poor Buick was Sideswiped Last Year, and I haven't moved the Hitch to the Caddy
  18. jimmbo

    SS Prop for Volvo SX

    When I switched to the SS I dropped 1" in pitch from the Stock AL Prop. What occurred I had my SS(OMC RAKER) from my previous Outboard on hand, so I had the Hub replaced so it would fit on a VP. I later replaced it with a Merc Enertia. Both props run about the same rpm as the VP AL prop did...
  19. jimmbo

    Photos not saving to server

    So what "Improvement" to the Software, caused this Glitch? History has shown, repeatedly, that Better is the Enemy of Good.
  20. jimmbo

    Proper prop?

    You are in the Upper half of the WOT Range which is Preferable. Was this attained with Normal Loading, Light Load, or Heavy Load? Was the the Engine Trimmed for Optimal Speed when you got the Results? Is the Engine mounted at the Correct Height? You say 14 1/2 X 19. I will assume it is a 3...
Top