Search results

  1. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok, electrical issues all seem to boil down to the tilt trim wires at the motor. Replaced those and no more issues. This supplied the correct amount of power to the starter so no more fly will sticking to the starter teeth. Trim goes up and down just fine now. 3 down 1 to go. I tested the...
  2. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Well it makes sense that there is lack of understanding because I don’t speak your language. All of this is first time for me. And I had never heard that noise before when the prop turns while in neutral. Just thought I’d state that it’s happening because if I didn’t and I say later that it...
  3. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Hello! Thanks for this info. Yes I’ve tried 3 batteries. Got it to turn over. That said the trim electric went out again. Won’t even click the relays. Gotta see if there’s another corroded and or cut spot.
  4. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    *The in water test WAS about to commence
  5. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    1st. Wait till you see what was wonky! So I got my battery all charged and shows 13.4. Nothin. So I did the cables to the starter. Sparked at the ground connection like 4th of July. But that’s it. Like the starter was dead. But it just worked the other day.. so im about to video the...
  6. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Lol. Just now seeing the wing nuts! No, I don’t use wing nuts. Ive not even seen a wing nut in years. 🤣
  7. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok Bat -12.7 - 10.5 at key turn Solenoid - BAT SIDE - 12.7 key turn 5.5 Solenoid bottom - 000. 5.5 at key turn Starter. - 000. Key turn 5.3
  8. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok will do.
  9. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok. At dinner at the moment with my boy. Will go back on my way home and check those and let you know what they are. I did notice today that when I turned the key it dropped the voltage down to 11.1 and slowly raised back up to 12.7. Which I don’t recall it ever doing that. But it also...
  10. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Yes
  11. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok. Back to the grind -
  12. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok! I’ve got the trim working nice and smooth. And I’ve got the shift shaft where it’s suppose to be ‘I think’. I can’t get it to turn over now. Tested the relays. It’s a brand new starter solenoid. I attached a video of what I hear. But I was wondering if there is a “button” of some sort...
  13. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Ok.. so I got an O ring for the manual relief valve screw. It still leaks oil when the trim moves. Which leads me to this. I got a multimeter and checked the relays and they’re still good which is good because they’re new. Checked the solenoid and get good readings there at 13.2. I noticed...
  14. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Lol! Funny you should mention.. Yeah when I wrote my plea this morning it wasn’t wake up, I worked on it all night and at the point of pure frustration and exhaustion, I closed up and began to type. Seriously appreciate the help! Found out the manual relief valve is $146.00 and nearly...
  15. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Wait, is this the shaft length? Set at 21-23/ 32"
  16. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Oh wow!! Ok I’ll check it out for sure. I think I’ll keep my focus on this shaft and electrical problem to solve and then tackle this next. I’m still trying to find the proper measurement but I ordered the service manual so I guess if worse comes to worse I’ll hopefully have it by this week...
  17. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    The tell tale come from the side and wraps around the back and out the back right.
  18. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Oh. Gotcha. Yeah my cooling system is in good shape. Thanks I’ll make sure the measurement is correct. Thanks for your help. G
  19. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Not sure I understand what the tell tale hose is. I’ll see if I can find the length for the rod. I needed not brute force for the release valve. I think the Oring broke and plugged the release space. The pressure was enough to stream oil all over me while being 2ft away. Thanks for the...
  20. Fisherg3

    1992 70hp Johnson - electrical issue with Trim and Start and gear shaft position fail

    Hello and thank you! Yes I did a complete water pump kit. The picture shows the new housing vs the one that was burnt out. The crazy thing is how hot it got to discolor the metal and also disintegrate the metal all while having cold water running through it! No wing nuts. I can get a...
Top