Search results

  1. B

    No power to F9.9 Yamaha

    Beautiful country in your neck of the woods. Have been through Woodinville. Decades ago.
  2. B

    No power to F9.9 Yamaha

    I think the motor needs to go to a dealer for an inspection.
  3. B

    No power to F9.9 Yamaha

    There is no 2017 F9.9XPB. Looks to me like you might have a T9.9XPB.
  4. B

    Can guage for trim be calibrated?

    Easy enough to test the sender for ohms in its full range of motion.
  5. B

    Can guage for trim be calibrated?

    Not your model but this should give you the idea.
  6. B

    Can guage for trim be calibrated?

    When you mention full up are you talking about the motor going up as high as it will go? If so, that is in the tilt range. Not the same as the trim range. The trim range is fully down and then up only to the point just below where the speed of the up tilt begins to increase. With the motor...
  7. B

    2003 Yamaha Outboard oil injection adjustment

    Another brilliant move. Sigh!
  8. B

    No power to F9.9 Yamaha

    12.25 in a lead acid battery is half charged. Suggest the battery be fully charged. 12.6/12.7 volts. Yes, that is the battery ground cable connection point.
  9. B

    No power to F9.9 Yamaha

    There are many, many, many different F9.9 models. F9.9's. F9.9A's. F9.9B's. F9.9F's In 2017 there were three F9.9 models offered. F9.9SMHB, F9.9LMHB and F9.9LEB. They are not all wired the same. The data plate on the side of the motor provides the complete model and the complete engine ID...
  10. B

    Moving the filter

    What is the engine ID or serial number?
  11. B

    Moving the filter

    Different design philosophy. Yam likes to "pull" fuel from a primary fuel filter. My Mercury EFI pumped it through the primary fuel filter. Racor fuel filters are rated for up to about 7 psi as I recall for folks that use an electric fuel pump to deliver fuel to a motor.
  12. B

    No power to F9.9 Yamaha

    Is the complete model of the motor not known?
  13. B

    Wiring diagram for 1999 15 Eh 4ST?

    You are welcome. Glad your figured it out.
  14. B

    Wiring diagram for 1999 15 Eh 4ST?

    Looks to have been made by Yamaha for Mercury. Equivalent of a Yamaha F15ESHX. In a Yamaha the white wire to the CDI assembly is grounded to stop the motor from running. I see a disconnected white wire. Does that lead to the CDI box?
  15. B

    Wiring diagram for 1999 15 Eh 4ST?

    What is the engine serial number plz?
  16. B

    200 hpdi compression. Good or no good

    You are well above Yamaha's minimum compression specification for that model. You can try some ring free for a period of time, or a decarbon treatment, to see if the pressures rise, or become closer to one another. But if the motor starts, idles and runs well it should not be of concern.
  17. B

    whining noise in throttle

    Sounds like you have a 703 side mounted remote control box. The warning horn/buzzer is located within the control box. When you hear the horn, stop the motor immediately. There is no failsafe mode. Keep operating the motor with the horn whining and you can ruin the motor. A reduction from...
  18. B

    Please help cant find wiring schematics/diagram for 86 mercury 150 XR2 serial number 0B199676

    What is the issue that you are trying to solve? The electrical connections to a two wire R/R can't get any simpler.
Top